10 CSR 40-4.080 - Previously Mined Areas

PURPOSE: This rule brings Missouri's regulations into line with the federal language.

(1) Remining operations on previously mined areas that contain a preexisting highwall shall comply with the requirements of 10 CSR 403.110 or 10 CSR 40-4.040, except as provided in this rule.

(2) The requirements of 10 CSR 40-3.110(1)(B) and (2)(A) requiring the elimination of highwalls shall not apply to remining operations where the volume of all reasonably available spoil is demonstrated in writing to the regulatory authority to be insufficient to completely back fill the reaffected or enlarged highwall. The highwall shall be eliminated to the maximum extent technically practical in accordance with the following criteria:

(A) All spoil generated by the remining operation and any other reasonably available spoil shall be used to backfill the area. Reasonably available spoil in the immediate vicinity of the remining operation shall be included within the permit area;

(B) The backfill shall be graded to a slope which is compatible with the approved post-mining land use and which provides adequate drainage and long-term stability;

(C) Any highwall remnant shall be stable and not pose a hazard to the public health and safety or to the environment. The operator shall demonstrate, to the satisfaction of the regulatory authority, that the highwall remnant is stable; and

(D) Spoil placed on the outslope during previous mining operations shall not be disturbed if the disturbances will cause instability of the remaining spoil or otherwise increase the hazard to the public health and safety or to the environment.

Notes

10 CSR 40-4.080

AUTHORITY: section 444.530, RSMo 1986.* Original rule filed May 2, 1989, effective Aug. 1, 1989.

AUTHORITY: section 444.530, RSMo 1986.* Original rule filed May 2, 1989, effective 8/1/1989.