Mont. Admin. r. 38.4.410 - SIDE CLEARANCE AT PLATFORMS
(1) Platforms eight
(8) inches or less above top rail require at least four (4) feet eight (8)
inches clearance.
(2) Platforms
four (4) feet or less above top rail require at least five (5) feet nine (9)
inches or seven (7) feet three (3) inches clearance. Whether the five (5) feet
nine (9) inches or seven (7) feet three (3) inches clearance shall be used in
any particular case shall be at the discretion of this Commission. Such
determination will be made upon written application by the railroad setting
forth the details of each particular installation.
(3) Platforms four (4) feet six (6) inches or
less above top of rail--when used principally for loading or unloading
refrigerator cars require at least eight (8) feet clearance.
(4) Icing platforms and supports require at
least five (5) feet nine (9) inches clearance.
(5) Platforms other than as set out above
require at least eight (8) feet six (6) inches clearance.
(6) Retractable platforms, either sliding or
hinged, which are attached to a permanent structure shall be so designed that
when not in use no part of such retractable platform shall fall within the
clearance limits herein prescribed for a platform of that height above the top
of the rail.
(7) Platforms defined
under (1) above may be combined with either (2) or (3) provided that the lower
platform present a level surface from a point not more than four (4) feet eight
(8) inches from centerline of track to the face of the wall of the platform
with which it is combined. No other combinations will be permitted.
(8) Platforms which were constructed prior to
October 27, 1978, may be extended at existing clearances.
Notes
Sec. 69-14-116, MCA; IMP, Sec. 69-14-116, MCA;
State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.
No prior version found.