129 Neb. Admin. Code, ch. 1, § 015 - "Allowable emissions"

"Allowable emissions" means

015.01 For a stationary source, the emissions rate of a stationary source calculated using the maximum rated capacity of the source (unless the source is subject to federally enforceable limits which restrict the operating rate, or hours of operation, or both) and the most stringent of the following:
015.01A The applicable standards set forth in 40 CFR Parts 60 (Standards of Performance for New Stationary Sources) or Parts 61 or 63 (National Emission Standards for Hazardous Air Pollutants);
015.01B Any applicable State Implementation Plan emissions limitation including those with a future compliance date; or
015.01C The emissions rate specified as a federally enforceable permit condition, including those with a future compliance date.
015.02 For a Plantwide Applicability Limitation (PAL), the definition is the same as in section 015.01 except as this definition is modified according to sections 015.02A and 015.02B:
015.02A The allowable emissions for any emissions unit shall be calculated considering any emission limitations that are enforceable as a practical matter on the emissions unit's potential to emit.
015.02B An emissions unit's potential to emit shall be determined using the definition in section 116 except that the words "or enforceable as a practical matter" should be added after "federally enforceable".


129 Neb. Admin. Code, ch. 1, § 015
Amended effective 7/15/2018

State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.

No prior version found.