N.H. Admin. Code § Arch 306.03 - Licensed Architect Seal/Stamp
(a) Upon issuance
of an initial license to an applicant as a licensed architect, the licensee
shall acquire an impression type seal or rubber stamp of the design specified
by these rules. This seal shall bear the licensee's name and number as shown on
the license. This seal, signature of the licensee and date shall be affixed on
all papers or documents involving the practice of architecture prepared by the
licensee issued or filed for public record.
(b) The seal shall consist of 2 concentric
circles with the outer circle having a diameter 1-9/16 inches and the inner
circle diameter 15/16 of an inch. In the space between the circles at the top
shall be the words "Licensed Architect" and at the bottom shall be the words
"The State of New Hampshire." In the space inside the inner circle shall be the
full name of the licensee and the license number written
horizontally.
(c) The requirements
of (b) above shall be as illustrated below in figure 3.1:
Figure 3.1 Seal/Stamp
Click here to view image
(d)
It shall be a violation of these rules for the licensee to stamp or seal any
documents with their seal after the license has expired, been revoked or
suspended or after the licensee has chosen retired status. It shall be a
violation of these rules for the licensee to stamp or seal any documents not
prepared by him or her personally or under his/her direct
supervision.
Notes
#7944, eff 8-27-03; ss by #9097, eff 2-29-08; amd by #9876, eff 3-1-11
State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.
No prior version found.