N.J. Admin. Code § 13:69E-1.4 - Non-value gaming chips for roulette and pokette
(a) Each
gaming chip which does not contain a denomination on either face thereof shall
be known as a "non-value" chip.
(b)
Each non-value chip utilized in a casino or casino simulcasting facility shall
be issued for the purpose of gaming at roulette and pokette.
(c) Each non-value chip issued by a casino
licensee shall contain certain identifying characteristics that may appear in
any location at least once on each face of the gaming chip and shall be applied
in a manner which ensures that each such characteristic shall be clearly
visible and remain a permanent part of the gaming chip. The characteristics
required by (c)1 and 2 below shall be applied in such a manner so as to be
visible to surveillance employees using the closed circuit television system.
The identifying characteristics of a non-value chip, at a minimum, shall
include:
1. The name, trade name, or other
identification of the casino licensee issuing the non-value chip;
2. A design, insert or symbol that will
permit a set of non-value chips being used at a particular gaming table to be
distinguished from the non-value chips being used at every other gaming table
in the casino or casino simulcasting facility;
3. The word "Roulette" or "Pokette," as
applicable; and
4. Such color
and/or design combinations as the Division may approve so as to readily
distinguish the non-value chips of each player at a particular gaming table
from:
i. The non-value chips of every other
player at the same gaming table; and
ii. The value chips issued by any casino
licensee.
(d)
Each non-value chip issued by a casino licensee shall contain an identifying
characteristic, to be known as an "edge spot," which shall:
1. Be applied in a manner which ensures that
the edge spot shall:
i. Be clearly visible on
the edge and, to the extent required by the Division on each face of the
non-value chip; and
ii. Remain a
permanent part of the non-value chip;
2. Be created by using the colors approved
for the face of the particular non-value chip pursuant to (c)4 above in
combination with one or more other colors that provide a contrast with the
color on the face of the chip and that enable it to be distinguished from the
non-value chips issued by any other casino licensee; and
3. Include a design, pattern or other feature
approved by the Division that a natural person with adequate training could
readily use to identify, when viewing the non-value chip through the closed
circuit television system of the casino licensee, the player to whom the
non-value chip has been assigned when the non-value chip is placed in a stack
of gaming chips or in any other location where only the edge of the non-value
chip is visible; provided, however, that the design, pattern or feature created
by the colors required by (d)2 above shall be sufficient by itself to satisfy
the requirements of this paragraph if approved for that purpose by the
Division.
(e) Each
casino licensee shall have a reserve non-value chip for each color utilized in
the casino or casino simulcasting facility with a design insert or symbol
different from those non-value chips comprising the primary set.
Notes
State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.
No prior version found.