N.J. Admin. Code § 5:14A-11.4 - Adoption as amended, of ASTM practice F 2007-18

(a) The Standard Practice for the Classification, Design, Manufacture, and Operation of Concession Go Karts and Facilities, designated by the American Society for Testing and Materials (ASTM) as F 2007-18, is adopted by reference, as amended, and made part of this subchapter and shall be enforced as part of this subchapter.

(b) Notwithstanding any provisions stated in the standard, where specific provisions of the standard conflict with the provisions expressly set forth in this chapter, the provisions set forth in this chapter shall govern.

(c) The standard shall be amended as follows:

1. Section 5.5--In the third line, delete "or" after "go-kart" insert "and";

2. Section 5.8--In the second line, delete "Section 6 of Practice F1159," and insert "Section 5 of F1159-15b";

3. Section 5.9--In the first sentence, insert "heated or" before the phrase "moving";

4. Section 5.11--In the second line, after "driver", delete "or" and insert "and" and in the third line, delete ", or both,";

5. Section 6.2--delete the phrase "free of vertical misalignment greater than 3/4 in within one-inch horizontal distance" and insert "maintained in good repair and free of cracks, obstructions and/or potholes which could damage the cart or cause the rider/driver to lose control of the vehicles." In the third line, add the word "solid" before "material";

6. Section 6.10.1--delete "may" and insert "shall." Add the phrase "but not be limited to," after the word "include";

7. Section 6.11--delete "may" and insert "shall"; and

8. Section 7.16--delete "of greater than 3/4 in. in vertical change within a one inch horizontal distance."

(d) The ASTM standard F 2007-18 may be obtained from:

American Society for Testing and Materials

100 Barr Harbor Drive

West Conshohocken, PA 19428-2959

Notes

N.J. Admin. Code § 5:14A-11.4

Amended by 55 N.J.R. 2055(b), effective 10/2/2023