CHAPTER 3745-34 - Underground Injection Control Program (Sec. 3745-34-01 to Sec. 3745-34-63)

  1. Sec. 3745-34-01 - Underground injection control definitions
  2. Sec. 3745-34-02 - Considerations under federal law
  3. Sec. 3745-34-03 - Confidentiality of information
  4. Sec. 3745-34-04 - Classification of wells
  5. Sec. 3745-34-05 - Identification of underground sources of drinking water
  6. Sec. 3745-34-06 - Prohibition of unauthorized injection
  7. Sec. 3745-34-07 - Prohibition of movement of fluid into underground sources of drinking water
  8. Sec. 3745-34-08 - Prohibition of class IV wells
  9. Sec. 3745-34-09 - Requirements for wells injecting hazardous waste
  10. Sec. 3745-34-10 - Waiver of requirement by director
  11. Sec. 3745-34-11 - Class V wells
  12. Sec. 3745-34-12 - Application by permit; authorization by permit
  13. Sec. 3745-34-13 - Class I permit application
  14. Sec. 3745-34-14 - Class I permit to drill applications
  15. Sec. 3745-34-15 - Class I permit to operate applications
  16. Sec. 3745-34-16 - Class V permit requirements
  17. Sec. 3745-34-17 - Signatories to permit applications and reports
  18. Sec. 3745-34-18 - Class V injection well area permits
  19. Sec. 3745-34-19 - Emergency permits
  20. Sec. 3745-34-20 - Effect of a permit
  21. Sec. 3745-34-21 - Duration of permits
  22. Sec. 3745-34-22 - Transfer of permits
  23. Sec. 3745-34-23 - Modification or revocation and reissuance of permits
  24. Sec. 3745-34-24 - Termination of permits
  25. Sec. 3745-34-25 - Minor modifications of permits
  26. Sec. 3745-34-26 - Conditions applicable to all permits
  27. Sec. 3745-34-27 - Establishing drilling permit and operating permit conditions
  28. Sec. 3745-34-28 - Schedule of compliance
  29. Sec. 3745-34-29 - Requirements for recording and reporting of monitoring results
  30. Sec. 3745-34-30 - Plan of corrective action
  31. Sec. 3745-34-32 - Area of review
  32. Sec. 3745-34-33 - Corrective action
  33. Sec. 3745-34-34 - Mechanical integrity
  34. Sec. 3745-34-35 - Criteria for establishing permitting priorities
  35. Sec. 3745-34-36 - Plugging and abandoning class I wells
  36. Sec. 3745-34-37 - Construction requirements for class I wells
  37. Sec. 3745-34-38 - Operating, monitoring, and reporting requirements for class I wells
  38. Sec. 3745-34-39 - Information to be considered by the director in authorizing class I wells
  39. Sec. 3745-34-40 - Seismic reflection survey requirements for class I wells
  40. Sec. 3745-34-50 - Criteria and standards for class I injection wells
  41. Sec. 3745-34-51 - Minimum criteria for siting class I hazardous waste injection wells
  42. Sec. 3745-34-52 - Area of review
  43. Sec. 3745-34-53 - Corrective action for wells in the area of review
  44. Sec. 3745-34-54 - Construction requirements
  45. Sec. 3745-34-55 - Logging, sampling, and testing prior to new well operation
  46. Sec. 3745-34-56 - Operating requirements
  47. Sec. 3745-34-57 - Testing and monitoring requirements
  48. Sec. 3745-34-58 - Reporting requirements
  49. Sec. 3745-34-59 - Information to be evaluated by the director
  50. Sec. 3745-34-60 - Closure
  51. Sec. 3745-34-61 - Post closure
  52. Sec. 3745-34-62 - Financial responsibility for closure and post closure care
  53. Sec. 3745-34-63 - Class I annual permit fee; fee per ton of waste injected

The following state regulations pages link to this page.