Ohio Admin. Code 3745-18-63 - Montgomery county emission limits

(A) No owner or operator of any coal-fired steam generating unit in Montgomery county, unless otherwise specified in this rule, shall cause or permit the emission of sulfur dioxide from any source to exceed a maximum of 1.5 pounds of sulfur dioxide per MM Btu actual heat input.
(B) [Reserved.]
(C) [Reserved.]
(D) [Reserved.]
(E) [Reserved.]
(F) [Reserved.]
(G) [Reserved.]
(H) [Reserved.]
(I) The "DP&L Tait Generating Station" (OEPA premise number 0857043333) or any subsequent owner or operator of the "DP&L Tait Generating Station, 2101 Arbor Blvd., Moraine, Ohio" shall not cause or permit the emission of sulfur dioxide from oil-fired IC units T-1 to T-4 (OEPA source numbers B507 to B510) to exceed a maximum of 0.5 pounds of sulfur dioxide per MM Btu actual heat input from each unit.
(J) [Reserved.]
(K) [Reserved.]
(L) [Reserved.]
(M) The "Dayton Power and Light Company, O.H. Hutchings CT Station" (OEPA premise number 0857780013) or any subsequent owner or operator of the "Dayton Power and Light Company, O.H. Hutchings CT Station, 9200 Chautauqua Road, Miamisburg, Ohio" shall not cause or permit the emission of sulfur dioxide from turbine number 7 (OEPA source number B007) to exceed a maximum of 0.5 pounds of sulfur dioxide per MM Btu actual heat input.
(N) The "Dayton Power and Light Company, Yankee Street Generating Station" (OEPA premise number 0857810015) or any subsequent owner or operator of the "Dayton Power and Light Company, Yankee Street Generating Station, 9975 Yankee Road Street, Dayton, Ohio" shall not cause or permit the emission of sulfur dioxide from turbine numbers y-1 to y-7 (OEPA source numbers B001 to B007) to exceed a maximum of 0.5 pounds of sulfur dioxide per MM Btu actual heat input from each turbine.
(O) [Reserved.]
(P) [Reserved.]
(Q) [Reserved.]
(R) [Reserved.]
(S) [Reserved.]
(T) The "Tate & Lyle, Incorporated Dayton" (OEPA premise number 0857041333) or any subsequent owner or operator of the "Tate & Lyle, Incorporated Dayton, 5600 Brentlinger Drive, Dayton, Ohio" shall not cause or permit the emission of sulfur dioxide from unit numbers 1 and 2 (OEPA source numbers B001 and B002) to exceed a maximum of 0.8 pounds of sulfur dioxide per MM Btu actual heat input from each boiler.

Notes

Ohio Admin. Code 3745-18-63
Effective: 2/3/2022
Five Year Review (FYR) Dates: 11/9/2021 and 11/09/2026
Promulgated Under: 119.03
Statutory Authority: 3704.03(E)
Rule Amplifies: 3704.03(A), 3704.03(E)
Prior Effective Dates: 12/28/1979, 11/01/1984, 01/23/2006, 02/17/2011, 02/16/2017

State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.


No prior version found.