Ohio Admin. Code 3745-20-15 - Standard for spraying
[Comment: For dates of non-regulatory government publications,
publications of recognized organizations and associations, federal rules, and
federal statutory provisions referenced in this rule, see paragraph
(C)
(A) No owner or operator of an operation in
which asbestos -containing materials are spray applied on buildings, structures,
pipes, and conduits, shall use material containing more than one per cent
asbestos , as determined using the method specified in 40 CFR Part 763, Subpart
E, Appendix E, Section 1, Polarized Light Microscopy (PLM), except as provided
in paragraph (C) of this rule.
(B)
The owner or operator of an operation in which asbestos -containing materials
that contain more than one per cent asbestos , as determined using the method
specified in 40 CFR Part 763, Subpart E, Appendix E, Section 1, Polarized Light
Microscopy (PLM), are spray applied on equipment and machinery, except as
provided in paragraph (C) of this rule, shall do the following:
(1) Notify the director at least twenty days
before beginning the spraying operation. The notice shall include the
following:
(a) Name and address of owner or
operator .
(b) Location of spraying
operation.
(c) Procedures to be
followed to comply with this rule.
(2)
Shall
not
Not cause or permit any visible
emissions to the outside air from spray- on application of asbestos -containing
material or use the methods specified by rule
3745-20-12 of the Administrative
Code to clean emissions containing particulate asbestos material before the
emissions escape to, or are vented to, the outside air .
(C) Paragraphs (A) and (B) of this rule do
not apply to the spray-on application of materials where the asbestos fibers in
the materials are encapsulated with a bituminous or resinous binder during
spraying and the materials are not friable after drying.
(D) Owners or operators of sources subject to
this rule are exempt from Chapters 3745-31 and 3745-35, and rule
3745-20-08 of the Administrative
Code.
Notes
Promulgated Under: 119.03
Statutory Authority: 3704.03(E)
Rule Amplifies: 3704.03(A), 3704.03(E)
Prior Effective Dates: 11/18/2002, 02/02/2007, 03/02/2012, 04/08/2018
State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.
[Comment: For dates of non-regulatory government publications, publications of recognized organizations and associations, federal rules, and federal statutory provisions referenced in this rule, see paragraph (C)
(A) No owner or operator of an operation in which asbestos-containing materials are spray applied on buildings, structures, pipes, and conduits, shall use material containing more than one per cent asbestos, as determined using the method specified in 40 CFR Part 763, Subpart E, Appendix E, Section 1, Polarized Light Microscopy (PLM), except as provided in paragraph (C) of this rule.
(B) The owner or operator of an operation in which asbestos-containing materials that contain more than one per cent asbestos, as determined using the method specified in 40 CFR Part 763, Subpart E, Appendix E, Section 1, Polarized Light Microscopy (PLM), are spray applied on equipment and machinery, except as provided in paragraph (C) of this rule, shall do the following:
(1) Notify the director at least twenty days before beginning the spraying operation. The notice shall include the following:
(a) Name and address of owner or operator.
(b) Location of spraying operation.
(c) Procedures to be followed to comply with this rule.
(2) Shall not Not cause or permit any visible emissions to the outside air from spray- on application of asbestos-containing material or use the methods specified by rule 3745-20-12 of the Administrative Code to clean emissions containing particulate asbestos material before the emissions escape to, or are vented to, the outside air.
(C) Paragraphs (A) and (B) of this rule do not apply to the spray-on application of materials where the asbestos fibers in the materials are encapsulated with a bituminous or resinous binder during spraying and the materials are not friable after drying.
(D) Owners or operators of sources subject to this rule are exempt from Chapters 3745-31 and 3745-35, and rule 3745-20-08 of the Administrative Code.
Notes
Promulgated Under: 119.03
Statutory Authority: 3704.03(E)
Rule Amplifies: 3704.03(A), 3704.03(E)
Prior Effective Dates: 11/18/2002, 02/02/2007, 03/02/2012, 04/08/2018