Ohio Admin. Code 3745-555-320 - Permit to install issuance
(A)
When acting on a
permit to install, the director shall follow the appropriate procedures set
forth in rule
3745-500-120
of the Administrative Code, Chapter 3745-49 of the Administrative Code, and
section 3734.09 of the Revised
Code.
(B)
An application, notwithstanding any deficiency, may be
considered and acted upon if sufficient information is contained in the detail
engineering plans, specifications, and information for the director to
determine whether the criteria set forth in this rule are
satisfied.
(C)
Criteria for issuance. Except as provided in paragraph
(B) of this rule, the director shall not issue a permit to install for a solid
waste transfer facility unless the director determines that the following
criteria are satisfied:
(1)
The transfer facility is capable of being constructed,
operated, and closed in compliance with Chapters 3704., 3714., 3734., and 6111.
of the Revised Code and rules adopted thereunder.
(2)
The permit to
install application demonstrates that the transfer facility will conform to the
siting criteria contained in rules
3745-555-110 to
3745-555-150 of
the Administrative Code.
(3)
The permit to install application demonstrates that the
transfer facility is designed in accordance with rule
3745-555-200
of the Administrative Code.
Notes
Promulgated Under: 119.03
Statutory Authority: 3734.02
Rule Amplifies: 3734.02
State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.
No prior version found.