Ohio Admin. Code 4781-6-03.10 - Stable foundations - division- approved alternative park installations
(A) Stable foundations for used manufactured
homes - general.
(1)
Commission
Division -
approved designs and details shall be acceptable alternatives for installations
of used manufactured homes only for licensed manufactured housing parks or as
otherwise specified in Chapter 4781-6 of the Administrative Code. Where an item
is not mentioned specifically in one of these alternative designs, that
installation item or element shall meet the state of Ohio manufactured home
installation standards under Chapter 4781-6 of the Administrative Code. A
foundation design method must be employed in its entirety. If an item or
element is specified in the selected alternative design, that item or element
or an equal or more stringent item or element shall be part of the
installation. At the time of permit approval and prior to the installation, the
alternative design must be selected and the authority having jurisdiction
informed as to which installation foundation alternative design or method the
installer seeks approval to use.
(2) These alternatives are not appropriate
for use in areas located within a one-
hundred- year flood plain.
(B) Alternate method 1 - existing
manufactured home parks.
(C) Alternate method 2 -
manufactured home commission
division park installation alternative foundation
designs.
The commission
which
(1) The
complete installation foundation design has been reviewed and recommended for
approval by the commission's designated engineer,
the commission subcommittee on foundations, and the commission
division ;
(2) The installation foundation design shall
not take the manufactured home out of compliance with the
federal manufactured home construction and safety
standards (MHCSS)
MHCSS ;
(3) The installation foundation design shall
provide protection to residents of manufactured housing that equals or exceeds
the protection provided by the installation standards for used manufactured
homes set forth in Chapter 4781-6 of the Administrative Code, except for frost depth
requirements for ribbons, runners, and
slabs;
(4) The installation
foundation design shall have broad applicability for use in a variety of
locations throughout Ohio and provide for the MHCSS, Ohio design loads,
and various Ohio soils
soil conditions,
and other design conditions throughout Ohio. The installation foundation design
shall clearly specify any conditions, limitations, or requirements, including site conditions specific to the designs;
and
(5) The installation foundation design shall
include, the dimensions of footings,
runners, ribbons, or slab; anchorage details
including spacing and general specifications for anchors,
; and pier and
blocking spacing requirements;
(6)
The installation foundation design shall be prepared by an Ohio registered
architect or professional engineer who has agreed to release
their
his or
her copyright control over the installation foundation design for
distribution by the commission
division as a public record; and
(7) The commission, or its designated engineer or its
subcommittee
division may request
additional drawings, details, and/or structural
calculations to be prepared and sealed by a licensed architect or professional
engineer who has agreed to release their
his or her
copyright control over the installation foundation design for distribution by
the commission
division as a public record as supporting documents
for the installation foundation design prior to approval by the
commission
division .
Notes
Promulgated Under: 119.03
Statutory Authority: 4781.04, 4781.14
Rule Amplifies: 4781.04, 4781.14
Prior Effective Dates: 07/01/2007, 01/01/2010, 12/01/2012
State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.
No prior version found.