(A) Purpose and applicability of a permit to
install.
(1) No person shall construct a new
concentrated animal feeding facility without first obtaining a permit to
install issued by the director.
(2)
Any person who plans to construct a large concentrated animal feeding operation
or a concentrated animal feeding facility or major concentrated animal feeding
facility shall comply with applicable rules
901:10-2-01 to
901:10-2-06 of the
Administrative Code.
(3) Any animal
feeding facility that is a small or medium concentrated animal feeding
operation may be required by the director to comply with applicable rules
901:10-2-01 and
901:10-2-03 to
901:10-2-06 of the
Administrative Code.
(a) If the director has
made a determination that the medium or small animal feeding facility shall be
required to be permitted as a medium or small concentrated animal feeding
operation; and
(b) If the director
determines that the existing animal feeding facility requires modifications in
order to comply with best management practices.
(4) A person that is required to obtain both
a permit to install pursuant to section
903.02 of the Revised Code and a
permit to operate pursuant to section
903.03 of the Revised Code shall
submit both applications for those permits simultaneously.
(B) Administrative procedures for a permit to
install.
(1) In order to obtain a permit to
install, the owner or operator shall submit:
(a) A properly completed application in
accordance with paragraph (C) of this rule; and
(b) An appropriate fee as stated in rule
901:10-1-04 of the
Administrative Code.
(2)
The owner or operator may amend the application for a permit to install prior
to the conduct of any public meeting that may be held for the draft permit to
install and/or while the permit to install application is pending before the
director.
(3) The owner or operator
shall notify the department prior to beginning actual construction of the
manure storage or treatment facility.
(4) Upon completion of construction of the
manure storage or treatment facility, the owner or operator shall submit a
notarized statement certifying that the facility was constructed in accordance
with the as-built plans to the department. As-built plans shall be provided and
signed by a professional engineer if the design plans require a professional
engineer as described in paragraph (A)(1) of rule
901:10-2-05 or paragraph (A)
of rule
901:10-2-06 of the
Administrative Code.
(a) A copy of the
completed and approved as-built plans shall be submitted to demonstrate
compliance with paragraph (A) of rule
901:10-2-05 or paragraph (A)
of rule
901:10-2-06 of the
Administrative Code and shall be submitted for the permanent record.
(b) In addition to as-built plans, the
following shall be submitted where applicable as part of the construction or
permit to install:
(i) Any soils
investigations, compaction testing, soil bearing confirmation or lab analyses
as required by plans.
(ii) Pictures
demonstrating construction specifications were followed.
(iii) Daily log of construction activity
including dates, weather conditions, and work completed.
(iv) Documentation demonstrating concrete mix
and concrete construction was in accordance to approved plans
(v) Any other construction documentation that
is required by the approved set of engineering plans or in the permit to
install.
(c) After
submitting a copy of the completed as-built plans and after the facilities are
inspected by the director or an authorized representative as required by this
rule, an authorized representative of the director will issue authorization to
stock animals or use a new manure storage or treatment facility and to thereby
commence operations in accordance with any permit to operate issued for the
facility. Facilities are required to be inspected by the director or an
authorized representative in a timely manner prior to stocking with animals or
using any new manure storage or treatment facility.
(5) The owner or operator shall maintain a
copy of the current permit to install issued by the department at the
concentrated animal feeding facility's site office. A copy of the as-built
plans will be kept at the office of the facility.
(6) A permit to install may be modified in
accordance with rule
901:10-1-09 of the
Administrative Code. The owner or operator shall not modify the concentrated
animal feeding facility without obtaining a permit
modification.
(C)
Contents of an application for a permit to install.
Unless otherwise indicated, an application for a permit to
install shall contain the information and criteria as required in rules
901:10-1-02 and
901:10-1-03 of the
Administrative Code and shall attach and/or include all of the following
information:
(1) The name and address
of the applicant, of all partners if the applicant is a partnership or of all
officers and directors if the applicant is a corporation and of any other
person who has a right to control or in fact controls management of the
applicant or the selection of officers, directors or managers of the
applicant.
(2) The type of
livestock and the number of animals that the concentrated animal feeding
facility would have the design capacity to raise or maintain and the
anticipated beginning and ending dates for work performed.
(3) A statement of the quantity of water that
the concentrated animal feeding facility will utilize on an average daily and
annual basis, a detailed description of the basis for the calculation utilized
in determining the quantity of the water utilized and a statement identifying
the source of the water.
(4) Copies
of recorded water well logs on file with the Ohio department of natural
resources division of water and their locations within a one thousand foot
radius of the manure storage or treatment facility, as located on a map that
includes the well locations.
(5) A
scaled map adequate to show detail that includes, but is not limited to:
(a) Approximate overall dimensions of the
manure storage or treatment facility;
(b) Boundaries of the concentrated animal
feeding facility;
(c) Location and
siting distances from the manure storage or treatment facility. For purposes of
identifying and illustrating the siting criteria, the owner or operator of a
large concentrated animal feeding operation or a concentrated animal feeding
facility or a major concentrated animal feeding facility is to submit a
document that demonstrates compliance with the siting criteria in rule
901:10-2-02 of the
Administrative Code; and
(d)
Identify the approximate location of all known subsurface drains within one
hundred feet of the proposed manure storage or treatment
facility.
(6) The report
required by paragraph (C) of rule
901:10-2-03 of the
Administrative Code, including the information on the soils, ground water
sampling and analysis, hydrology, subsurface geology and topography of the land
area used for the manure storage or treatment facility based on the subsurface
geological exploration conducted in accordance with rule
901:10-2-03 of the
Administrative Code. The report may also include site-specific information and
conclusions derived from the site's subsurface geological exploration. If
required as a result of the subsurface geological exploration conducted
pursuant to rule
901:10-2-03 of the
Administrative Code, additional groundwater monitoring shall be
included.
(7) Designs, plans and
detailed engineering drawings for the proposed construction of the concentrated
animal feeding facility that comply with rules 901:10-2-04,
901:10-2-05 and /or
901:10-2-06 of the Administrative Code and include the proposed location of the
construction site, and design and construction plans and specifications,
including anticipated beginning and ending dates for the work performed.
[Comment: Include detailed engineering drawings, for example;
cross sections, pipe requirements, concrete or earthwork specifications,
illustrations and profiles for construction of the manure storage or treatment
facility.]
(8) The
precipitation runoff and stormwater grading plans required by rule
901:10-2-04 of the
Administrative Code.