Movement of all units with a base width over 14 feet or an overall width in
excess of 15 feet on two lane highways will be required to submit for approval
by the Department a traffic control plan that is acceptable to all road
authorities through which the vehicle(s) will travel and lists the desired date
of move, routes of travel, turnouts for traffic relief and dimensions of
(2) If the eave extends more
than 24 inches beyond either side of the mobile home base, in addition to all
other lights required by law, a clearance light as described in ORS
816.200 will be mounted on the
outermost front and rear corners of the eave.
(3) Vehicles transporting manufactured homes
that exceed 14 feet width at the base must travel only in the right lane unless
obstructions, merging traffic or permit requirements dictate otherwise. A
vehicle transporting a manufactured home in excess of 14 feet at the base, must
not pass other over-dimensional vehicles.
(4) The seller of a manufactured home that
exceeds 14 feet width at the base, and is to be transported over Oregon
highways, is the shipper of the manufactured home. As the shipper, the seller
will have the obligation of pre-determining whether the appropriate road
authority may issue an over-dimension permit so that the manufactured home can
be delivered to the location specified by the potential purchaser of the
Or. Admin. R.
TO 2-1998, f. 3-10-98,
cert. ef. 4-1-98; HWD 3-2012, f. & cert. ef.
Stat. Auth.: ORS
Stats. Implemented: ORS