Or. Admin. R. 918-225-0445 - Other Installation Standards
(1) Boilers or pressure vessels not designed
or constructed in accordance with the Boiler and Pressure Vessel Code of the
American Society of Mechanical Engineers (ASME) may be installed in Oregon if
the boiler or pressure vessel was designed or constructed in accordance with
the applicable standards issued by one of the following organizations:
(a) British Standards Institute;
(b) Canadian Standards Association;
(c) European Committee for Standardization;
or
(d) Syndicat National de la
Chaudronnerie de la Tuyauterie & de la Maintenance Industrielle
(SNCT).
(2) Boilers and
pressure vessels constructed in accordance with the standards listed in (1)(a)
through (d) of this rule must:
(a) Have
controls and safety devices that are comparable to the controls and safety
devices outlined in ASME CSD-1, Controls and Safety Devices for Automatically
Fired Boilers, including, but not limited to, data plates and warning labels
that are written in English;
(b) Be
fitted with pressure relief valves that are built to ASME standards;
and,
(c) Be installed, operated,
maintained, and repaired in accordance with the provisions of ORS
480.510 to
480.670 and these
rules.
Notes
Stat. Auth.: ORS 480.545 & 480.560
Stats. Implemented: ORS 480.545 & 480.560
State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.
No prior version found.