Or. Admin. R. 918-515-0150 - Installer Responsibilities and Limits
(1) An installer must:
(a) Work for a business with a valid
Construction Contractors Board license; or
(b) The installer is a business with a valid
Construction Contractors Board license.
(2) Work covered by an installer's license is
limited to:
(a) Preparing the site and stand
for the installation of the manufactured dwelling or cabana;
(b) Installing manufactured dwellings,
cabanas, skirting, underfloor vapor retarder, ventilation, access, and
temporary steps;
(c) Installing the
support, tie-down, ERB's, and the structural connections for manufactured
dwellings and cabanas;
(d)
Providing setbacks, clearances, and fire life and safety protection;
(e) Providing plumbing and electrical utility
connections;
(f) Providing
plumbing, electrical, and mechanical crossover, appliance, and fixture
connections of and to the manufactured dwelling or cabana as permitted by these
rules;
(g) Install appliance
exhaust ducts and terminations when required;
(h) Performing plumbing, mechanical, and
electrical tests when required; and
(i) Serving as the supervisor of individuals
licensed by the division as limited installers.
(3) An installer must, at a minimum:
(a) Assure the manufactured dwelling or
cabana stand is in compliance with the Oregon Manufactured Dwelling
Installation Specialty Code prior to the installation of the manufactured
dwelling or cabana;
(b) Assure all
setbacks, clearances, and fire life and safety installations are in compliance
with the Oregon Manufactured Dwelling Installation Specialty Code;
(c) Perform electrical and plumbing tests if
the respective plumbing and electrical connections were made by the
installer;
(d) Close and secure all
access panels and covers on or under the manufactured dwelling or
cabana;
(e) Assure the underfloor
dryer and range exhaust ducts are roughed in if the manufactured dwelling is
equipped with or provides for the installation of such an appliance requiring
exhaust ducts;
(f) Assure that all
doors and windows are adjusted, secured in place, and operational;
(g) Assure all ship-loose flue vents and
chimneys are installed, secured in place, and capped according to their
listing;
(h) Where the installer
also installs the skirting, comply with OAR 918-515-0490(1);
(i) Affix a certification tag to each
manufactured dwelling or cabana installed;
(j) Complete all reporting and application
forms required by these rules; and
(k) Leave the manufacturer's installation
instructions at the installation site to be available at the time of the
inspection if used for any part of the installation;
(l) Assure all portions of the manufactured
dwelling installation performed by the installer are in compliance with the
Oregon Manufactured Dwelling Installation Specialty Code ; and
(m) Correct all applicable nonconformances
within 30 days of receipt of a correction notice .
Notes
Publications: Publications referenced are available from the agency.
Stat. Auth.: ORS 446.176, 446.400 & 446.405
Stats. Implemented: ORS 446.395
State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.
No prior version found.