Or. Admin. Code § 437-007-1060 - Additional Requirements for Log Trucks Equipped With Self-Loaders

(1) Self-loaders built for log trucks after July 1, 1980, must have a:

(a) Load check valve (velocity fuse) or similar device on the jib boom.

(b) Seat offset from the point of attachment of the boom.

(c) Seat and boom structure that rotate concurrently.

(2) The operators of self-loading log trucks must:

(a) Not heel logs over their heads.

(b) Avoid heeling logs on the operator side of the boom.

(3) There must be a safe and adequate means of access to and exit from the loading work station on self-loading log trucks.

(4) A self-loading log truck must not load itself or another truck when the loading process is:

(a) Under or within an active spar guyline circle or similar overhead hazard.

(b) Out of a deck when yarding or skidding pose a hazard to the loader operator.

(5) When loading around powerlines the requirements of OAR 437-007-0230 must be complied with.

(6) Self-loading log truck operators must not unload their own load unless they use a positive means of securing the logs when wrappers and binders are removed.

NOTE: The loading boom, when placed alongside the load, may serve this purpose when no other means are available.

(7) Self-loading log truck operators must not operate chain saws or yard logs when working alone.

(8) Self-loading log truck operators must comply with OAR 437-007-0210, Checking System, and 437-007-0215, Working Alone requirements.

Notes

Or. Admin. Code § 437-007-1060

OSHA 5-2003, f. 6-2-03, cert. ef. 12-1-03

Stat. Auth.: ORS 654.025(2) & ORS 656.726(4)

Stats. Implemented: ORS 654.001 - ORS 654.295