25 Pa. Code § 245.233 - Mapping requirements
(a) A
site -specific installation permit application must contain maps and plans of
the proposed storage tank system or facility site showing all of the following:
(1) The boundaries for the proposed facility
site .
(2) The location of the
proposed storage tanks.
(3) The
location and names of public roads within or adjacent to the proposed facility
site .
(4) The location of proposed
monitoring wells.
(5) The
municipality and county.
(6) The
elevation and location of test borings and core samples.
(7) The ownership, if known, location and
extent of known workings of active, inactive and abandoned underground mines
including mine openings within the proposed permit site .
(8) Streams, lakes or surface watercourses
located on or adjacent to the proposed permit site .
(9) The location and ownership of public or
private groundwater supplies within 2,500 feet of the proposed permit
site .
(10) Sufficient slope
measurements to adequately represent the existing land surface configuration of
the proposed permit site .
(b) Maps, plans and cross sections required
by this section shall be accurately surveyed and on a scale satisfactory to the
Department , not less than 1 inch to 400 feet and in a manner satisfactory to
the Department . The maps, plans and cross sections shall be prepared by a
Pennsylvania registered professional engineer, Pennsylvania registered land
surveyor or Pennsylvania registered professional geologist with assistance from
experts in related fields.
Notes
This section cited in 25 Pa. Code § 245.232 (relating to general requirements).
State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.
No prior version found.