510 R.I. Code R. 510-RICR-00-00-19.6 - Chapter 6
Delete M 614.8.5 and substitute the following:
M614.8.5 Length identification. The maximum
length of dryer duct may exceed thirty-five feet (35') when a permanent
placard, measuring a minimum five inches (5") wide, three inches (3") high, and
one eighth of one inch (1/8") thick, and constructed of either wood, metal, or
rigid plastic, and bearing raised or embossed lettering stating the following:
"WARNING: THE EFFECTIVE LENGTH OF THIS DRYER DUCT IS xxx FEET. ANY DRYER
CONNECTED TO THIS EXHAUST DUCT MUST BE RATED TO USE AN EXHAUST DUCT OF THIS
LENGTH, PER THE MANUFACTURERS SPECIFATIONS; SERVERE RISK OF FIRE MAY RESULT FOR
NONCOMPLIANCE WITH THIS NOTICE."
The provisions of M102.4 shall be used in establishing the effective length of the ductwork installed and noted on the placard. The placard shall be permanently attached to the wall or floor within six inches (6") of the terminus of the duct.
Notes
Amended effective
State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.
No prior version found.