S.D. Admin. R. 74:56:03:14 - Operation and maintenance of cathodic protection
All owners or operators of metal AST systems with cathodic protection must comply with the following requirements:
(1) All cathodic protection systems must be
maintained to provide continuous cathodic protection to the metal components of
the AST system in contact with the ground or an electrolyte;
(2) All AST systems equipped with cathodic
protection systems must be inspected according to the following minimum
inspection schedule:
(a) The cathodic
protection system shall be checked within six months of installation for
adequate protection and annually thereafter by a corrosion protection
tester;
(b) All AST systems with
impressed current or sacrificial anodes shall be inspected every 30 days to
ensure continuous operation of the rectifier or anodes; and
(c) All results must be maintained for the
life of the AST system;
(3) One or both of the following criteria
shall be followed when taking tests of AST systems:
(a) A negative potential of at least 0.85
volts measured between an AST system and a saturated copper sulphate
(Cu2SO4) reference electrode
touching the soil above the piping and at a distance of one foot from the tank;
or
(b) A negative polarization
potential shift of at least 100 mV (.10V) as measured between the AST system
and the copper sulphate reference electrode contacting the soil. This shift is
the polarization decay determined after the protective current is disconnected;
and
(4) Voltage
measurements other than those across the structure electrolyte boundary shall
be considered for valid interpretation of the voltage measurement taken for the
criteria in subdivision (3) of this section.
Owners or operators of all new and upgraded AST systems must certify compliance with corrosion protection requirements on the certification of compliance form.
Notes
General Authority: SDCL 34A-2-93, 34A-2-101.
Law Implemented: SDCL 34A-2-98, 34A-2-99.
Certification of compliance, ยง 74:56:03:03.
State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.
No prior version found.