Tenn. Comp. R. & Regs. 0780-02-13-.10 - DATA PLATES
(1) The
manufacturer shall place directly or by reference on one or more permanent data
plates the following information:
(a) The
manufacturer's name and address;
(b) The manufacturer's serial number of the
unit or component;
(c) The label
number(s);
(d) The date of
manufacture;
(e) The name of the
manufacturer and the model designation of each major factory installed
appliance; and
(f) The title and
edition of each applicable nationally recognized code with which the unit or
component complies.
(2)
The data plate(s) shall also include the following information, if required by
the standards:
(a) Identification of
permissible type of gas for appliances and directions for water and drain
connection;
(b) Snow, wind,
seismic, and other live loads;
(c)
Electrical ratings - instructions and warnings on voltage; and
(d) Special conditions or limitations on use
of the unit or component, including unsuitability for areas in which specified
environmental conditions prevail.
(3) The data plate(s) shall be attached to
the modular building unit or component in the vicinity of the electrical
distribution panel, or in some other location where it will be readily
accessible for inspection.
(4) If,
in the opinion of the Department, the shape or size of a component is such that
a data plate cannot be attached to it permanently, the information required by
this rule may be placed
(a) In a manual crated
with the component, if such information will be needed by future occupants of
the building; or
(b) On a tag
attached to the crate in which the component is shipped, if such information
will not be needed by future occupants of the building. If life safety is
affected, the item in question shall be plainly designated.
(5) The manufacturer shall keep a
permanent record of the completed data plate on every modular building unit
produced.
Notes
Authority: T.C.A. ยงยง 68-36-302 through 68-36-305, 68-102-113, and 68-126-305.
State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.
No prior version found.