Tenn. Comp. R. & Regs. 0800-03-03-.07 - REPAIRS AND ALTERATIONS
(1) Repairs and
alterations shall not be made without the permission of an inspector employed
by an accredited Authorized Inspection Agency responsible for the in-service
inspection of the subject boiler or pressure vessel. Such repairs and
alterations shall be done in accordance with the NB. The inspector authorizing
the repair or alteration shall sign the necessary NB "NB-R" form or
forms.
(2) The person, corporation,
partnership or firm performing the repair or alteration shall have a valid
license in accordance with T.C.A. §§
68-122-202. In
order to qualify for such license, the applicant shall have a valid Certificate
of Authorization from the NB for the use of a Repair Code symbol
stamp.
(3) Before any necessary
repairs or alterations are made, an inspector employed by the Authorized
Inspection Agency responsible for the in-service inspection of the boiler or
vessel shall be consulted. After such repairs or alterations are made, they
shall be reviewed and found acceptable by the authorizing inspector.
(4) Repairs shall be made by an organization
holding a current National Board Repair Certificate of Authorization and the
license required by paragraph (2) of this rule.
(5) Alterations shall be made by an
organization holding a current National Board Repair Certificate of
Authorization and the license required by paragraph (2) of this rule.
(6) In the application of riveted patches,
the design of the patch and the method of installation shall be in accordance
with the National Board Inspection Code, 1973 edition as amended.
Notes
Authority: T.C.A. §§ 4-5-202, 4-5-202(a)(3), 68-122-101, 68-122-102, 68-122-104, 68-122-108, and 68-122-202.
State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.
No prior version found.