Tenn. Comp. R. & Regs. 1200-03-22-.04 - STANDARDS FOR NEW OR MODIFIED SOURCES OF LEAD

(1) A new source the actual emissions of which are in excess of 5.0 tons per year of lead or lead compounds measured as elemental lead shall utilize best available control technology (BACT).
(2) Any modification of a lead point source which results in an increase in excess of 0.6 tons per year of lead or lead compounds measured as elemental lead shall utilize BACT.
(3) The owner or operator of a proposed new or modified source of lead shall perform a source impact analysis to demonstrate that the allowable emission increases from the proposed source or modification would not cause or contribute to a violation of the lead ambient air quality standard in the source impact area including background concentrations. Source impact analysis shall be based on the applicable air quality models and data bases acceptable to the Technical Secretary.
(4) Additional requirements for certain new or modified sources of lead are given in Paragraph 1200-3-9-.01(4), Prevention of Significant Deterioration and in Chapter 1200-3-16, New Source Performance Standards, of these regulations.

Notes

Tenn. Comp. R. & Regs. 1200-03-22-.04
Original rule filed November 5, 1984; effective December 5, 1984. Amendment filed September 21, 1988; effective November 6, 1988.

Authority: T.C.A. ยงยง 68-25-105 and 4-5-201 et. seq.

State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.


No prior version found.