28 Tex. Admin. Code § 3.4505 - General Calculation Requirements for Basic Reserves and Premium Deficiency Reserves
(a) At the election of
the company for any one or more specified plans of life insurance, the minimum
mortality standard for basic reserves may be calculated using the 1980 CSO
valuation tables with select mortality factors (or any other valuation
mortality table adopted by the NAIC after the effective date of this subchapter
and promulgated by regulation by the commissioner for this purpose). If select
mortality factors are elected, they may be:
(1) the ten-year select mortality factors
incorporated in the Insurance Code Chapter 425, Subchapter B, The Standard
Valuation Law;
(2) the select
mortality factors adopted in §
3.4502 of this subchapter
(relating to Adoption of Tables of Select Mortality Factors); or
(3) any other table of select mortality
factors adopted by the NAIC after the effective date of this regulation and
promulgated by regulation by the commissioner for the purpose of calculating
basic reserves.
(b)
Deficiency reserves, if any, are calculated for each policy as the excess, if
greater than zero, of the quantity A over the basic reserve. The quantity A is
obtained by recalculating the basic reserve for the policy using guaranteed
gross premiums instead of net premiums when the guaranteed gross premiums are
less than the corresponding net premiums. At the election of the company for
any one or more specified plans of insurance, the quantity A and the
corresponding net premiums used in the determination of quantity A may be based
upon the 1980 CSO valuation tables with select mortality factors (or any other
valuation mortality table adopted by the NAIC after the effective date of this
regulation and promulgated by regulation by the commissioner). If select
mortality factors are elected, they may be:
(1) the ten-year select mortality factors in
the Insurance Code Chapter 425, Subchapter B, The Standard Valuation
Law;
(2) the select mortality
factors adopted in §
3.4502 of this
subchapter;
(3) For durations in
the first segment, X percent of the select mortality factors adopted in §
3.4502 of this subchapter, subject
to the following:
(A) X may vary by policy
year, policy form, underwriting classification, issue age, or any other policy
factor expected to affect mortality experience;
(B) X is such that, when using the valuation
interest rate used for basic reserves, clause (i) of this subparagraph is
greater than or equal to clause (ii) of this subparagraph:
(i) The actuarial present value of future
death benefits, calculated using the mortality rates resulting from the
application of X;
(ii) The
actuarial present value of future death benefits calculated using anticipated
mortality experience without recognition of mortality improvement beyond the
valuation date;
(C) X is
such that the mortality rates resulting from the application of X are at least
as great as the anticipated mortality experience, without recognition of
mortality improvement beyond the valuation date, in each of the first five
years after the valuation date;
(D)
The appointed actuary shall increase X at any valuation date where it is
necessary to continue to meet all the requirements of paragraph (3) of this
subsection;
(E) The appointed
actuary may decrease X at any valuation date as long as X continues to meet all
the requirements of paragraph (3) of this subsection; and
(F) The appointed actuary shall specifically
take into account the adverse effect on expected mortality and lapsation of any
anticipated or actual increase in gross premiums.
(G) If X is less than 100 percent at any
duration for any policy, the following requirements shall be met:
(i) The appointed actuary shall annually
prepare an actuarial opinion and memorandum for the company in conformance with
the requirements of §
3.1607 of this chapter (relating
to Description of Actuarial Memorandum Including an Asset Adequacy Analysis and
Regulatory Asset Adequacy Issues Summary);
(ii) In the regulatory asset adequacy issues
summary prescribed under §
3.1607 of this chapter, the
appointed actuary shall disclose the impact of the insufficiency of assets to
support the payment of benefits and expenses and the establishment of statutory
reserves during one or more interim periods; and
(iii) The appointed actuary shall annually
opine for all policies subject to this regulation as to whether the mortality
rates resulting from the application of X meet the requirements of paragraph
(3) of this subsection. This opinion shall be supported by an actuarial report,
subject to appropriate Actuarial Standards of Practice promulgated by the
Actuarial Standards Board of the American Academy of Actuaries. The X factors
shall reflect anticipated future mortality, without recognition of mortality
improvement beyond the valuation date, taking into account relevant emerging
experience.
(4) Any other table of select mortality
factors adopted by the NAIC after the effective date of this regulation and
promulgated by regulation by the commissioner for the purpose of calculating
deficiency reserves.
(c)
This subsection applies to both basic reserves and deficiency reserves. Any set
of select mortality factors may be used only for the first segment. However, if
the first segment is less than ten years, the appropriate ten-year select
mortality factors may be used thereafter through the tenth policy year from the
date of issue.
(d) In determining
basic reserves or deficiency reserves, guaranteed gross premiums without policy
fees may be used where the calculation involves the guaranteed gross premium
but only if the policy fee is a level dollar amount after the first policy
year. In determining deficiency reserves, policy fees may be included in
guaranteed gross premiums even if not included in the actual calculation of
basic reserves.
(e) Reserves for
policies that have changes to guaranteed gross premiums, guaranteed benefits,
guaranteed charges, or guaranteed credits that are unilaterally made by the
insurer after issue and that are effective for more than one year after the
date of the change shall be the greatest of the following:
(1) reserves calculated ignoring the
guarantee,
(2) reserves assuming
the guarantee was made at issue, and
(3) reserves assuming that the policy was
issued on the date of the guarantee.
(f) The commissioner may require that the
company document the extent of the adequacy of reserves for specified blocks,
including but not limited to policies issued prior to the effective date of
this subchapter. This documentation may include a demonstration of the extent
to which aggregation with other non-specified blocks of business is relied upon
in the formation of the appointed actuary opinion pursuant to and consistent
with the requirements of §
3.1607 of this chapter.
Notes
State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.
No prior version found.