9VAC25-580-180 - Release detection recordkeeping

9VAC25-580-180. Release detection recordkeeping

All UST system owners and operators must maintain records in accordance with 9VAC25-580-120 demonstrating compliance with all applicable requirements of this "part". These records must include the following:

1. All written performance claims pertaining to any release detection system used, and the manner in which these claims have been justified or tested by the equipment manufacturer or installer, must be maintained for five years from the date of installation or as long as the method of release detection is used, whichever is greater. Not later than (insert date three years after effective date of amendment), records of site assessments required under subdivisions 5 f and 6 g of 9VAC25-580-160 must be maintained for as long as the methods are used. Records of site assessments developed after (insert effective date of amendment) must be signed by a professional engineer or professional geologist, or equivalent licensed professional with experience in environmental engineering, hydrogeology, or other relevant technical discipline acceptable to the board;

2. The results of any sampling, testing, or monitoring must be maintained for at least one year, or for another reasonable period of time determined by the board, except as follows:

a. The results of annual operation tests conducted in accordance with subdivision A 3 of 9VAC25-580-130 must be maintained for three years. At a minimum, the results must list each component tested, indicate whether each component tested meets criteria in subdivision A 3 of 9VAC25-580-130 or needs to have action taken, and describe any action taken to correct an issue;

b. The results of tank tightness testing conducted in accordance with subdivision 3 of 9VAC25-580-160 must be retained until the next test is conducted; and

c. The results of tank tightness testing, line tightness testing, and vapor monitoring using a tracer compound placed in the tank system conducted in accordance with 9VAC25-580-390 D must be retained until the next test is conducted; and

3. Written documentation of all calibration, maintenance, and repair of release detection equipment permanently located on-site must be maintained for at least one year after the servicing work is completed or for such longer period as may be required by the board. Any schedules of required calibration and maintenance provided by the release detection equipment manufacturer must be retained for five years from the date of installation.

(Derived from VR680-13-02 § 4.6, eff. October 25, 1989; Amended, Virginia Register Volume 34, Issue 01, eff. 1/1/2018.)

Statutory Authority: §§ 62-1.44.15 and 62.1-44.34:9 of the Code of Virginia; 42 USC § 6901 et seq.; 40 CFR "part"s 280 and 281.

The following state regulations pages link to this page.