Wash. Admin. Code § 204-21-120 - Cornering lamps
Cornering lamps:
(1)
Must meet SAE Standard J852a.
(2)
Must be on the front of the vehicle near the side or the side near the
front.
(3) Must be mounted no lower
than twelve inches nor higher than thirty inches.
(4) Must, if they have means to adjust and
aim the lamp, be mounted so the center of the high intensity portion of the
beam is within forty to fifty degrees from the longitudinal axis of the
vertical toward the front. The vertical aim must be within the center of the
high intensity zone, ten to fourteen inches below the level of the lamp
center.
(5) Must, if they don't
have aiming mechanisms, be mounted in a fixed position on the vehicle in
accordance with the manufacturer's instructions.
Notes
Statutory Authority: RCW 46.37.005 and 46.37.320. 08-19-104, § 204-21-120, filed 9/17/08, effective 10/18/08.
State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.
No prior version found.