Wash. Admin. Code § 296-127-01372 - Sheet metal workers
For the purpose of the Washington state public works law, chapter 39.12 RCW, sheet metal workers perform the following work:
(1) The handling, conditioning, assembling,
installing, servicing, repairing, altering and dismantling of the duct work for
the heating, ventilation and air conditioning systems regardless of the
materials used and the setting and the servicing of all equipment and all
supports and reinforcements in connection therewith.
(2) The installation of expansion and
discharge valves, air filters, and water filters in heating, ventilation and
air conditioning systems.
(3) The
testing and balancing of air-handling equipment and duct work.
(4) The handling, conditioning, assembling,
installing, repairing and dismantling (except when a building is demolished) of
cornices, gutters and down spouts.
(5) The installation of metal siding and
metal roof decking, regardless of the fastening method, or what it is fastened
to.
(6) The installation of
furnaces and any and all sheet metal work in connection with or incidental to
commercial kitchen equipment or refrigerating plants.
(7) The handling, moving, hoisting and
storing of all sheet metal materials on the job site and all the cleanup
required in connection with sheet metal work.
Notes
Statutory Authority: Chapter 39.12 RCW, RCW 43.22.270 and 43.22.051. 00-15-077, § 296-127-01372, filed 7/19/00, effective 7/19/00.
State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.
No prior version found.