Wash. Admin. Code § 296-807-15050 - Inspect and maintain tools properly

(1) You must make sure any tool that is not in proper working condition is:

(a) Immediately removed from service;

(b) Tagged;

(c) Properly repaired as specified in the manufacturer's instructions before being used again.

(2) You must regularly service the tool and inspect it for worn or damaged parts at intervals recommended by the tool manufacturer.

(3) You must replace worn or damaged parts before the tool is used. This must be done:

(a) By a qualified person;

(b) Using only parts supplied by the tool manufacturer.

(4) You must keep a written record of inspection dates.

Notes

Wash. Admin. Code § 296-807-15050

Amended by WSR 15-23-086, Filed 11/17/2015, effective 12/18/2015

Statutory Authority: RCW 49.17.010, [49.17].040,[49.17].050, and [49.17].060. 03-09-009, § 296-807-15050, filed 4/4/03, effective 8/1/03.