Wash. Admin. Code § 296-807-17020 - Visually inspect jacks and keep them in good working order
|
Note: |
There are two types of inspection, frequent or periodic, depending on how often they are done. |
|
Note: |
The jack should be lubricated following the manufacturer's instructions. |
Table 4
Jack Inspection Requirements
| Inspection Item | Frequent Inspection | Periodic Inspection |
| Check all of the following items that apply to the jack: | ||
| Improper pawl engagement | X | X |
| Excessive pawl wear | X | X |
| Chipped, cracked, or worn rack teeth | X | X |
| Cracked or damaged housing | X | X |
| Damaged, bent, or worn threads | X | X |
| Leaking hydraulic fluid | X | X |
| Scored or damaged plunger | X | X |
| Improper functioning | X | X |
| Free movement of swivel, heads, and caps | X | X |
| Loose bolts or rivets | X | X |
| Damaged or improperly assembled accessory equipment | X | X |
| Rack wear or bending | X | X |
| Other items as specified in the manufacturer's instructions | X | X |
| Watch the jack during operation | X | X |
| More detailed inspection required if a designated person determines any condition discovered is a hazard | X | |
| Clean and check internal parts for wear or damage if inspection indicates an internal problem | X | |
Notes
Statutory Authority: RCW 49.17.010, 49.17.040, 49.17.050, 49.17.060. 07-03-163, § 296-807-17020, filed 1/24/07, effective 4/1/07; 03-09-009, § 296-807-17020, filed 4/4/03, effective 8/1/03.
State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.