308-30-070 - Size and form of official seal or stamp

308-30-070. Size and form of official seal or stamp

An official seal or stamp shall conform to the following requirements:

(1) The seal or stamp shall include the following information:

(a) The words "notary public";

(b) The words "state of Washington";

(c) The notary public's name as commissioned;

(d) The notary public's commission expiration date; and

(e) The notary public's commission number.

(2) The type on this seal or stamp shall be a minimum of 8 point type.

(3) The seal or stamp shall conform to the following physical requirements:

(a) The seal or stamp shall be minimum one and five-eighths inches diameter if circular, or one inch wide by one and five-eighths inches long if rectangular;

(b) The face of the seal or stamp shall be permanently affixed; and

(c) If the stamp is affixed to a tangible record, it shall be applied in permanent ink and shall be capable of being photocopied.

(4) The seal or stamp shall not contain the Washington state seal.

(Amended by WSR 18-12-028, Filed 5/29/2018, effective 7/1/2018)

Statutory Authority: RCW 42.44.190. 93-05-009, § 308-30-070, filed 2/5/93, effective 3/8/93. Statutory Authority: 1985 c 156 §§ 5 and 20. 85-24-025 (Order PL 571), § 308-30-070, filed 11/26/85, effective 1/1/86.

The following state regulations pages link to this page.