CONVERSION VENDOR UNIT AND MEDICAL UNIT CONSTRUCTION CODE GENERAL

  1. § 296-150V-0800 - What codes apply to conversion vendor units and medical units?
  2. § 296-150V-0930 - When are structural load tests or structural calculations required?
  3. § 296-150V-0950 - What requirements apply to roof coverings?
  4. § 296-150V-1040 - Are there floor requirements?
  5. § 296-150V-1070 - What requirements apply to floor closure material?
  6. § 296-150V-1090 - What are the standards for equipment and installations?
  7. § 296-150V-1100 - What are the flame-spread limitations?
  8. § 296-150V-1110 - Combustible limitations
  9. § 296-150V-1120 - What are the standards for wall and cabinet protection?
  10. § 296-150V-1170 - What are the light and ventilation requirements?
  11. § 296-150V-1180 - What requirements apply to conversion vendor unit exits?
  12. § 296-150V-1185 - What exit door requirements apply to self-propelled medical unit exits?
  13. § 296-150V-1190 - Interior privacy locks
  14. § 296-150V-1303 - How must storage batteries be installed in a conversion vendor unit or medical unit?
  15. § 296-150V-1330 - What are the mechanical requirements for a conversion vendor unit or medical unit?
  16. § 296-150V-1350 - What are the LPG system enclosure and mounting requirements for a conversion vendor unit or medical unit?
  17. § 296-150V-1360 - What are the fuel gas piping design requirements for a conversion vendor unit or medical unit?
  18. § 296-150V-1380 - Can gas tubing be concealed in a conversion vendor unit or medical unit?
  19. § 296-150V-1390 - What are the pipe-joint compound requirements for gas piping in a conversion vendor unit or medical unit?
  20. § 296-150V-1400 - What are the gas piping hanger and support requirements for a conversion vendor unit or medical unit?
  21. § 296-150V-1410 - What are the electrical bonding requirements for gas piping in a conversion vendor unit or medical unit?
  22. § 296-150V-1420 - How are gas supply connections in a conversion vendor unit or medical unit identified?
  23. § 296-150V-1430 - What requirements apply to gas piping system openings?
  24. § 296-150V-1440 - Are gas piping shut-off valves required in a conversion vendor unit or medical unit?
  25. § 296-150V-1450 - What requirements apply to testing for gas piping leaks before conversion vendor unit or medical unit appliances are connected?
  26. § 296-150V-1460 - What requirements apply to testing for gas piping leaks after conversion vendor unit or medical unit appliances are connected?
  27. § 296-150V-1470 - What are the requirements for appliance installations?
  28. § 296-150V-1530 - What general plumbing requirements apply?
  29. § 296-150V-1540 - What are the plumbing definitions?
  30. § 296-150V-1550 - What requirements apply to drain outlets?
  31. § 296-150V-1560 - What is the minimum clearance for drain outlets?
  32. § 296-150V-1570 - What requirements apply to water-supply connections?
  33. § 296-150V-1580 - What requirements apply to water heater relief valves and safety devices?
  34. § 296-150V-1590 - What requirements apply to waste holding tanks for conversion vendor units?
  35. § 296-150V-1600 - What are the requirements associated with medical and conversion vending units that have been manufactured and used outside the state according to RCW 43.22.380?

State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.

No prior version found.