W. Va. Code R. § 64-19-10 - Identification Numbers of Water Well Rigs and Well Head
10.1. All water well contractors shall ensure
that all water well rigs they use or those used by their employees are clearly
marked with legible and plainly visible identification numbers at all
times.
10.2. The identification
number to be used on water well drilling rigs is the certification number of
the water well driller at the well site who is responsible for the water well
drilling operations.
10.3.
Certification numbers shall be printed on each side of every water well
drilling rig in numerals of not less than two inches high and the numerals
shall be in a color sufficiently different from the color of the vehicle or
equipment so that the certification number is plainly legible.
10.4. Water well contractors shall ensure
that all water well rigs they use or those used by their employees are clearly
marked as provided in subsections 10.2 and 10.3 of this rule.
10.5. Each well drilling contractor shall
securely attach a metal tag or engraved well cap to the wellhead containing the
following information: the contractor's name, address and permit number, the
depth of the well and the date of construction or alteration.
Notes
State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.
No prior version found.