Wis. Admin. Code Department of Natural Resources § NR 286.02 - Applicability
Current through March 28, 2022
(1) The effluent limitations, standards of
performance, pretreatment standards, and other provision in this chapter are
applicable to pollutants or pollutant properties in discharges of process waste
resulting from manufacture in any of the following product subcategories.
(a) Pneumatic tires and inner tubes
(b) Emulsion crumb rubber
(c) Solution crumb rubber
(d) Latex rubber.
(e) Small-sized rubber products manufacturing
plants.
(f) Medium-sized rubber
products manufacturing plants.
(g)
Large-sized rubber products manufacturing plants.
(h) Wet digestion process reclaimed
rubber.
(i) Pan, dry digestion, and
mechanically reclaimed rubber.
(j)
Latex-dipped, latex-extruded, and latex-molded rubber products.
(k) Latex foam.
(2) Discharges resulting from the production
of latex based products, tires (except retreaded tires) and inner tubes, and
textiles subject to the provisions of ch. NR 296 are specifically excluded from
subcategories (e), (f), and (g) of sub. (1).
(3) Discharges resulting from textile
facilities subject to the provisions of ch. NR 296 are specifically excluded
from subcategories (j) and (k) of sub. (1).
Notes
The following state regulations pages link to this page.
State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.