Sec. NR 405.08 - Control technology review

ยง NR 405.08. Control technology review

(1) A major stationary source or major modification shall meet each applicable emissions limitation under chs. NR 400 to 499 and under sections 111 and 112 of the Act (42 USC 7411 and 7412).

(2) A new major stationary source shall apply best available control technology for each air contaminant that it would have the potential to emit in significant amounts.

(3) A major modification shall apply best available control technology for each air contaminant for which it would be a significant net emissions increase at the source. This requirement applies to each proposed emissions unit at which a net emissions increase in the air contaminant would occur as a result of a physical change or change in the method of operation in the unit.

(4) For phased construction projects, the determination of best available control technology shall be reviewed and modified as appropriate at the latest reasonable time which occurs no later than 18 months prior to commencement of construction of each independent phase of the project. At such time, the owner or operator of the applicable stationary source may be required to demonstrate the adequacy of any previous determination of best available control technology for the source.

(Cr. Register, January, 1987, No. 373, eff. 2-1-87; am. (1), Register, April, 1995, No. 472, eff. 5-1-95; am. (3), Register, December, 1995, No. 480, eff. 1-1-96.)

The following state regulations pages link to this page.