33 U.S. Code § 2314 - Innovative technology
prev | next
The Secretary shall, whenever feasible, seek to promote long- and short-term cost savings, increased efficiency, reliability, and safety, and improved environmental results through the use of innovative technology in all phases of water resources development projects and programs under the Secretary’s jurisdiction. To further this goal, Congress encourages the Secretary to—
(1) use procurement and contracting procedures that encourage innovative project design, construction, rehabilitation, repair, and operation and maintenance technologies;
(2) frequently review technical and design criteria to remove or modify unnecessary impediments to innovation;
(3) increase timely exchange of technical information with universities, private companies, government agencies, and individuals;
(b) Accelerated adoption of innovative technologies for management of contaminated sediments
(1) Test projects
The Secretary shall approve an appropriate number of projects to test, under actual field conditions, innovative technologies for environmentally sound management of contaminated sediments.
(2) Demonstration projects
The Secretary may approve an appropriate number of projects to demonstrate innovative technologies that have been pilot tested under paragraph (1).
(3) Conduct of projects
Each pilot project under paragraph (1) and demonstration project under paragraph (2) shall be conducted by a university with proven expertise in the research and development of contaminated sediment treatment technologies and innovative applications using waste materials.
Within 2 years after November 17, 1988, and thereafter at the Secretary’s discretion, the Secretary shall provide Congress with a report on the results of, and recommendations to increase, the development and use of innovative technology in water resources development projects under the Secretary’s jurisdiction. Such report shall also contain information regarding innovative technologies which the Secretary has considered and rejected for use in water resources development projects under the Secretary’s jurisdiction.
Source(Pub. L. 100–676, § 8,Nov. 17, 1988, 102 Stat. 4023; Pub. L. 106–53, title V, § 503(b),Aug. 17, 1999, 113 Stat. 337; Pub. L. 113–121, title III, § 3021,June 10, 2014, 128 Stat. 1301.)
Section was enacted as part of the Water Resources Development Act of 1988, and not as part of the Water Resources Development Act of 1986 which comprises this chapter.
2014—Subsec. (d). Pub. L. 113–121substituted “methods, or materials, including roller compacted concrete, geosynthetic materials, and advanced composites, that the Secretary determines are appropriate to carry out this section.” for “materials, or methods which the Secretary determines are previously undemonstrated or are too new to be considered standard practice.”
1999—Subsecs. (b) to (d). Pub. L. 106–53added subsec. (b) and redesignated former subsecs. (b) and (c) as (c) and (d), respectively.
“(a) Pilot Program.—The Secretary [of the Army] may conduct a pilot program consisting of not more than 5 authorized projects to test the design-build method of project delivery on various authorized civil works projects of the Corps of Engineers, including levees, pumping plants, revetments, dikes, dredging, weirs, dams, retaining walls, generation facilities, mattress laying, recreation facilities, and other water resources facilities.
“(b) Design-Build Defined.—In this section, the term ‘design-build’ means an agreement between the Federal Government and a contractor that provides for both the design and construction of a project by a single contract.
“(c) Report.—Not later than 4 years after the date of enactment of this Act [Dec. 11, 2000], the Secretary shall transmit to Congress a report on the results of the pilot program.”
Review of Innovative Dredging Technologies
“(1) In general.—Not later than June 1, 2001, the Secretary shall complete a review of innovative dredging technologies designed to minimize or eliminate contamination of a water column upon removal of contaminated sediments.
“(A) Selection of technology.—After completion of the review under paragraph (1), the Secretary shall select, from among the technologies reviewed, the technology that the Secretary determines will best increase the effectiveness of removing contaminated sediments and significantly reduce contamination of the water column.
“(B) Agreement.—Not later than December 31, 2001, the Secretary shall enter into an agreement with a public or private entity to test the selected technology in the vicinity of Peoria Lakes, Illinois.
“(3) Authorization of appropriations.—There is authorized to be appropriated to carry out this subsection $2,000,000.”
Beneficial Use of Waste Tire Rubber
“(a) In General.—The Secretary shall, when appropriate, encourage the beneficial use of waste tire rubber (including crumb rubber and baled tire products) recycled from tires.
“(b) Included Beneficial Uses.—Beneficial uses under subsection (a) may include marine pilings, underwater framing, floating docks with built-in flotation, utility poles, and other uses associated with transportation and infrastructure projects receiving Federal funds.
“(c) Use of Waste Tire Rubber.—The Secretary shall encourage the use, when appropriate, of waste tire rubber (including crumb rubber) in projects described in subsection (b).”
LII has no control over and does not endorse any external Internet site that contains links to or references LII.