46 U.S. Code § 14513 - Dual tonnage measurement
Revised section 14513
Source: Section (U.S. Code) 46 App. U.S.C. 83 to 83g.
Section 14513 gives discretionary authority to the Secretary to exclude certain spaces in measuring the regulatory tonnage of a vessel, and requires the Secretary to prescribe the design, location and dimensions of the tonnage mark to be placed on the vessel. Section 14513 further provides that if spaces are excluded by the Secretary, they shall be comparable to those the Secretary could have excluded in existing law (46 App. U.S.C. 83a). Section 14513(c) provides that if a vessel’s tonnage mark is below the uppermost part of the load line mark, each certificate that states the vessel’s tonnages must state the gross and net tonnages when the mark is submerged and when it is not submerged.
Section 2 of the Act of September 29, 1965, referred to in subsec. (a), was classified to section 83a of the former Appendix to this title and was repealed by Pub. L. 99–509, title V, § 5104(b), Oct. 21, 1986, 100 Stat. 1928.
2010—Subsec. (c)(1). Pub. L. 111–281, § 303(h)(1), substituted “vessel is assigned two sets of gross and net tonnages under this section,” for “vessel’s tonnage mark is below the uppermost part of the load line marks,” and inserted “vessel’s tonnage” before “mark is submerged”.
Subsec. (c)(2). Pub. L. 111–281, § 303(h)(2), substituted “as assigned under this section.” for period at end.