14 CFR 21.609 - Location of or change to manufacturing facilities.

Status message

There are 4 Updates appearing in the Federal Register for 14 CFR Part 21. View below or at eCFR (GPOAccess)
§ 21.609 Location of or change to manufacturing facilities.

(a) An applicant may obtain a TSO authorization for manufacturing facilities located outside of the United States if the FAA finds no undue burden in administering the applicable requirements of Title 49 U.S.C. and this subchapter.

(b) The TSO authorization holder must obtain FAA approval before making any changes to the location of any of its manufacturing facilities.

(c) The TSO authorization holder must immediately notify the FAA, in writing, of any change to the manufacturing facilities that may affect the inspection, conformity, or airworthiness of its product or article.

Title 14 published on 2015-11-17

The following are ALL rules, proposed rules, and notices (chronologically) published in the Federal Register relating to 14 CFR Part 21 after this date.

  • 2016-12-30; vol. 81 # 251 - Friday, December 30, 2016
    1. 81 FR 96572 - Revision of Airworthiness Standards for Normal, Utility, Acrobatic, and Commuter Category Airplanes
      GPO FDSys XML | Text
      DEPARTMENT OF TRANSPORTATION, Federal Aviation Administration
      Final rule.
      Effective August 30, 2017.
      14 CFR Parts 21, 23, 35, 43, 91, 121, and 135

Title 14 published on 2015-11-17.

The following are only the Rules published in the Federal Register after the published date of Title 14.

For a complete list of all Rules, Proposed Rules, and Notices view the Rulemaking tab.

  • 2016-12-30; vol. 81 # 251 - Friday, December 30, 2016
    1. 81 FR 96572 - Revision of Airworthiness Standards for Normal, Utility, Acrobatic, and Commuter Category Airplanes
      GPO FDSys: XML | Text
      DEPARTMENT OF TRANSPORTATION, Federal Aviation Administration
      Final rule.
      Effective August 30, 2017.
      14 CFR Parts 21, 23, 35, 43, 91, 121, and 135