19 CFR 10.214 - Certificate of Origin.
(a)General. A Certificate of Origin must be employed to certify that a textile or apparel article being exported from a beneficiary country to the United States qualifies for the preferential treatment referred to in § 10.211. The Certificate of Origin must be prepared in the beneficiary country by the exporter or producer or by the exporter's or producer's authorized agent having knowledge of the facts in the form specified in paragraph (b) of this section. If the person preparing the Certificate of Origin is not the producer of the article, the person may complete and sign a Certificate of Origin on the basis of:
(2) A completed and signed Certificate of Origin for the article voluntarily provided to the person by the producer.
(b)Form of Certificate. The Certificate of Origin referred to in paragraph (a) of this section must be in the following format:
African Growth and Opportunity Act Textile Certificate of Origin
|1. Exporter Name and Address:||3. Importer Name and Address:|
|2. Producer Name and Address:||4. Preference Group:|
|5. Description of Article:|
|1-A||Apparel assembled from U.S. fabrics and/or knit-to-shape components, from U.S. yarns. All fabric must be cut in the United States||10.213(a)(1).|
|2-B||Apparel assembled from U.S. fabrics and/or knit-to-shape components, from U.S. yarns. All fabric must be cut in the United States. After assembly, the apparel is embroidered or subject to stone-washing, enzyme-washing, acid washing, perma-pressing, oven-baking, bleaching, garment-dyeing, screen printing, or other similar processes||10.213(a)(2).|
|3-C||Apparel assembled from U.S. fabrics and/or U.S. knit-to-shape components and/or U.S.
||10.213(a)(3) or 10.213(a)(11).|
|4-D||Apparel assembled from beneficiary country fabrics and/or knit-to-shape components, from yarns originating in the United States and/or one or more beneficiary countries or former beneficiary countries||10.213(a)(4).|
|5-E||Apparel assembled or knit-to-shape and assembled, or both, in one or more lesser developed beneficiary countries regardless of the country of origin of the fabric or the yarn used to make such articles||10.213(a)(5).|
|6-F||Knit-to-shape sweaters in chief weight of cashmere||10.213(a)(6).|
|7-G||Knit-to-shape sweaters 50 percent or more by weight of wool measuring 21.5 microns in diameter or finer||10.213(a)(7).|
|8-H||Apparel assembled from fabrics or yarns considered in short supply in the NAFTA, or designated as not available in commercial quantities in the United States||10.213(a)(8) or 10.213(a)(9).|
|9-I||Handloomed fabrics, handmade articles made of handloomed fabrics, or textile folklore articles - as defined in bilateral consultations; ethnic printed fabric||10.213(a)(10).|
|0-J||Textile articles classifiable in Chapters 50 through 60 or Chapter 63, HTSUS, that are products of a lesser developed beneficiary country and are wholly formed in one or more such countries from fibers, yarns, fabrics, fabric components, or components knit-to-shape that are the product of one or more such countries||10.213(a)(12).|
|6. U.S./African Fabric Producer Name and Address:||7. U.S./African Yarn Producer Name and Address:|
|8. U.S. Thread Producer Name and Address:|
|9. Handloomed, Handmade, or Folklore Article or Ethnic Printed Fabric:||10. Name of Short Supply or Designated Fabric or Yarn:|
|I certify that the information on this document is complete and accurate and I assume the responsibility for proving such representations. I understand that I am liable for any false statements or material omissions made on or in connection with this document. I agree to maintain, and present upon request, documentation necessary to support this certificate.|
|11. Authorized Signature:||12. Company:|
|13. Name: (Print or Type)||14. Title:|
|15. Date: (DD/MM/YY)||16. Blanket Period
(c)Preparation of Certificate. The following rules will apply for purposes of completing the Certificate of Origin set forth in paragraph (b) of this section:
(1) Blocks 1 through 5 pertain only to the final article exported to the United States for which preferential treatment may be claimed;
(2) Block 1 should state the legal name and address (including country) of the exporter;
(3) Block 2 should state the legal name and address (including country) of the producer. If there is more than one producer, attach a list stating the legal name and address (including country) of all additional producers. If this information is confidential, it is acceptable to state “available to CBP upon request” in block 2. If the producer and the exporter are the same, state “same” in block 2;
(4) Block 3 should state the legal name and address (including country) of the importer;
(5) In block 4, insert the number and/or letter that identifies the preference group which applies to the article according to the description contained in the CFR provision cited on the Certificate for that group;
(6) Block 5 should provide a full description of each article. The description should be sufficient to relate it to the invoice description and to the description of the article in the international Harmonized System. Include the invoice number as shown on the commercial invoice or, if the invoice number is not known, include another unique reference number such as the shipping order number;
(7) Blocks 6 through 10 must be completed only when the block in question calls for information that is relevant to the preference group identified in block 4;
(8) Block 6 should state the legal name and address (including country) of the fabric producer;
(9) Block 7 should state the legal name and address (including country) of the yarn producer;
(10) Block 8 should state the legal name and address (including country) of the thread producer;
(11) Block 9 should state the name of the folklore article or should state that the article is handloomed, handmade or an ethnic printed fabric;
(12) Block 10, should be completed only when preference group identifier “8” and/or “H” is inserted in block 4 and should state the name of the fabric or yarn that is in short supply in the NAFTA or that has been designated as not available in commercial quantities in the United States;
(14) Block 15 should reflect the date on which the Certificate was completed and signed;
(15) Block 16 should be completed if the Certificate is intended to cover multiple shipments of identical articles as described in block 5 that are imported into the United States during a specified period of up to one year (see § 10.216(b)(4)(ii)). The “from” date is the date on which the Certificate became applicable to the article covered by the blanket Certificate (this date may be prior to the date reflected in block 15). The “to” date is the date on which the blanket period expires;
(16) The telephone and facsimile numbers included in block 17 should be those at which the person who signed the Certificate may be contacted; and
(17) The Certificate may be printed and reproduced locally. If more space is needed to complete the Certificate, attach a continuation sheet.
Title 19 published on 2015-11-19
The following are ALL rules, proposed rules, and notices (chronologically) published in the Federal Register relating to 19 CFR Part 10 after this date.
Title 19 published on 2015-11-19.
The following are only the Rules published in the Federal Register after the published date of Title 19.
For a complete list of all Rules, Proposed Rules, and Notices view the Rulemaking tab.