Jump to navigation
This is a list of United States Code sections, Statutes at Large, Public Laws, and Presidential Documents, which provide rulemaking authority for this CFR Part.
This list is taken from the Parallel Table of Authorities and Rules provided by GPO [Government Printing Office].
It is not guaranteed to be accurate or up-to-date, though we do refresh the database weekly. More limitations on accuracy are described at the GPO site.
§ 66 - Rules and forms prescribed by Secretary
§ 1202 - Harmonized Tariff Schedule
§ 1551 - Designation as carrier of bonded merchandise
§ 1552 - Entry for immediate transportation
§ 1553 - Entry for transportation and exportation; lottery material from Canada
§ 1623 - Bonds and other security
§ 1624 - General regulations
Title 19 published on 09-Jun-2018 03:50
The following are ALL rules, proposed rules, and notices (chronologically) published in the Federal Register relating to 19 CFR Part 18 after this date.
This final rule adopts, with several changes, proposed amendments to U.S. Customs and Border Protection (CBP) regulations regarding changes to the in-bond process published in the Federal Register on February 22, 2012. The in-bond process allows imported merchandise to be entered at one U.S. port of entry without appraisement or payment of duties and transported by a bonded carrier to another U.S. port of entry or other authorized destination provided all statutory and regulatory conditions are met. At the destination port, the merchandise is entered or exported. The changes in this rule, including the automation of the in-bond process, will enhance CBP's ability to regulate and track in-bond merchandise and ensure that in-bond merchandise is properly entered or exported. This document addresses comments received in response to the proposed rule and makes several changes in response to the comments that further simplify and facilitate the in-bond process.
This final rule amends U.S. Customs and Border Protection regulations regarding the requirements to provide data for certain exported cargo to conform to current requirements. Various CBP regulations regarding exported cargo refer to outdated regulations or requirements of the U.S. Census Bureau, including the requirement to submit a paper Shipper's Export Declaration (SED). The U.S. Census Bureau's Foreign Trade Regulations (FTR) have been amended to eliminate the SED and to require that the information that was previously provided on the paper SED be filed electronically through the Automated Export System. This rule amends the CBP regulations to incorporate the current requirements. The rule also makes related conforming changes as well as non-substantive editorial and nomenclature changes.
U.S. Customs and Border Protection (CBP) published an Interim Final Rule (CBP Dec. 15-14) on October 13, 2015, in the Federal Register, which amends the CBP regulations to reflect that on November 1, 2015, the Automated Commercial Environment (ACE) will be a CBP-authorized Electronic Data Interchange (EDI) System. That document erroneously included language in Amendatory Instruction 38 that was not consistent with the text of the existing CFR. This document corrects the text in Amendatory Instruction 38.
This document amends the U.S. Customs and Border Protection (CBP) regulations to reflect that on November 1, 2015, the Automated Commercial Environment (ACE) will be a CBP-authorized Electronic Data Interchange (EDI) System. This regulatory document informs the public that the Automated Commercial System (ACS) is being phased out as a CBP-authorized EDI System for the processing electronic entry and entry summary filings (also known as entry filings). ACE will replace the Automated Commercial System (ACS) as the CBP-authorized EDI system for processing commercial trade data. This document also announces the conclusion of the ACE Cargo Release and the Entry Summary, Accounts and Revenue tests with regard to the entry and entry summary requirements that are now part of the CBP regulations.
U.S. Customs and Border Protection (CBP) published a notice of proposed rulemaking in the Federal Register on February 22, 2012, proposing various changes to the in-bond regulations to enhance CBP's ability to regulate and track in-bond merchandise and to ensure that the in-bond merchandise is properly entered and duties are paid or that the in-bond merchandise is exported. In that document, CBP published a summary of its analysis under the Regulatory Flexibility Act and stated that the complete Initial Regulatory Flexibility Analysis (IRFA) was posted on the regulations.gov Web site. As CBP inadvertently failed to post the IRFA on the docket when the NPRM was published, CBP is notifying the public that the IRFA has now been posted and is seeking comments on the conclusion in the NPRM and the IRFA that the rule may have a significant economic impact on a substantial number of small entities.
Under the U.S. Customs and Border Protection (CBP) regulations, imported merchandise may be transported in-bond. This process allows imported merchandise to be entered at one U.S. port of entry without appraisement or payment of duties and transported by a bonded carrier to another U.S. port of entry provided all statutory and regulatory conditions are met. At the destination port, the merchandise is officially entered into the commerce of the United States and duties paid, or, the merchandise is exported. CBP is proposing various changes to the in-bond regulations to enhance CBP's ability to regulate and track in-bond merchandise and to ensure that the in-bond merchandise is properly entered and duties are paid or that the in-bond merchandise is exported. Among other things, the proposed changes would: eliminate the paper in-bond application (CBP Form 7512) and require carriers or their agents to electronically file the in-bond application; require additional information on the in-bond application including the six-digit Harmonized Tariff Schedule number, if available, and information relevant to the safety and security of the in-bond merchandise; establish a 30-day maximum time to transport in-bond merchandise between United States ports, for all modes of transportation except pipeline; require carriers to electronically request permission from CBP before diverting the in-bond merchandise from its intended destination port to another port; and require carriers to report the arrival and location of the in-bond merchandise within 24 hours of arrival at the port of destination or port of export. CBP also proposes various other changes, including the restructuring of the in-bond regulations, so that they are more logical and better track the in-bond process. At this time, CBP is not proposing to change the in-bond procedures found in the air commerce regulations, except to change certain times periods to conform to the proposed changes in this document.