Jump to navigation
General. The employer shall develop and maintain a safe practices manual which shall be made available at the dive location to each dive team member.
(1) The safe practices manual shall contain a copy of this standard and the employer's policies for implementing the requirements of this standard.
(2) For each diving mode engaged in, the safe practices manual shall include:
(i) Safety procedures and checklists for diving operations;
(ii) Assignments and responsibilities of the dive team members;
(iii) Equipment procedures and checklists; and
(iv) Emergency procedures for fire, equipment failure, adverse environmental conditions, and medical illness and injury.
This is a list of United States Code sections, Statutes at Large, Public Laws, and Presidential Documents, which provide rulemaking authority for this CFR Part.
This list is taken from the Parallel Table of Authorities and Rules provided by GPO [Government Printing Office].
It is not guaranteed to be accurate or up-to-date, though we do refresh the database weekly. More limitations on accuracy are described at the GPO site.
§ 553 - Rule making
§ 951 - Declaration of findings and purposes
§ 952 - Definitions
§ 953 - National Foundation on the Arts and the Humanities
§ 954 - National Endowment for the Arts
§ 954a - Access to the arts through support of education
§ 955 - National Council on the Arts
§ 955a - Omitted
§ 955b - National Medal of Arts
§ 956 - National Endowment for the Humanities
§ 956a - National Capital arts and cultural affairs; grant programs
§ 957 - National Council on the Humanities
§ 957a - Omitted
§ 958 - Federal Council on the Arts and the Humanities
§ 959 - Administrative provisions
§ 959a - Gifts, bequests, and devises
§ 960 - Authorization of appropriations
§ 9a - Credit of receipts
§ 11 - Bureau established
§ 653 - Geographic applicability; judicial enforcement; applicability to existing standards; report to Congress on duplication and coordination of Federal laws;...rights, duties, or liabilities of employers and employees unaffected
§ 655 - Standards
§ 655 note - Standards
§ 657 - Inspections, investigations, and recordkeeping
§ 1904 - Authorization of appropriations
§ 9701 - Fees and charges for Government services and things of value
§ 941 - Safety rules and regulations
§ 3704 - Health and safety standards in building trades and construction industry
113 Stat. 1501A-222
114 Stat. 1901
Title 29 published on 2015-07-01
The following are ALL rules, proposed rules, and notices (chronologically) published in the Federal Register relating to 29 CFR Part 1910 after this date.
OSHA is revising and updating its general industry standards on walking-working surfaces to prevent and reduce workplace slips, trips, and falls, as well as other injuries and fatalities associated with walking-working surface hazards. The final rule includes revised and new provisions addressing, for example, fixed ladders; rope descent systems; fall protection systems and criteria, including personal fall protection systems; and training on fall hazards and fall protection systems. In addition, the final rule adds requirements on the design, performance, and use of personal fall protection systems. The final rule increases consistency between the general industry and construction standards, which will make compliance easier for employers who conduct operations in both industry sectors. Similarly, the final rule updates requirements to reflect advances in technology and to make them consistent with more recent OSHA standards and national consensus standards. OSHA has also reorganized the requirements and incorporated plain language in order to make the final rule easier to understand and follow. The final rule also uses performance-based language whenever possible to give employers greater compliance flexibility.
OSHA is proposing to add two modified PortaCount® quantitative fit-testing protocols to its Respiratory Protection Standard. The proposed protocols would apply to employers in general industry, shipyard employment, and the construction industry. Both proposed protocols are variations of the existing OSHA-accepted PortaCount® protocol, but differ from it by the exercise sets, exercise duration, and sampling sequence. If approved, the modified PortaCount® protocols would be alternatives to the existing quantitative fit-testing protocols already listed in an appendix of the Respiratory Protection Standard. In addition, OSHA is proposing to amend an appendix to clarify that PortaCount® fit test devices equipped with the N95-Companion TM Technology are covered by the approved PortaCount® protocols.
In response to the President's Executive Order 13563, “Improving Regulations and Regulatory Review,” the Occupational Safety and Health Administration (OSHA) is continuing its efforts to remove or revise outdated, duplicative, unnecessary, and inconsistent requirements in its safety and health standards. The current review, the fourth in this ongoing effort, is called Standards Improvement Project-Phase IV (SIP-IV). The goal of the proposed rulemaking is to reduce regulatory burden while maintaining or enhancing employees' safety and health. SIP-IV focuses primarily on OSHA's construction standards.
OSHA published a final rule on occupational exposure to respirable crystalline silica on March 25, 2016 which became effective on June 23, 2016. This document corrects typographical errors in the final rule by revising these sections.
This rule is a technical amendment announcing that OMB has approved the collections of information contained in OSHA's standards for Occupational Exposure to Respirable Crystalline Silica and revising OSHA's regulations to reflect that approval. The OMB approval number is 1218-0266.
OSHA invites interested parties to participate in an informal stakeholder meeting concerning tree care operations on July 13, 2016, in Washington, DC. This meeting is a continuation of OSHA's information collection on tree care operations. OSHA plans to use the information gathered at this meeting, together with other information in the record, to explore the possible development of a proposed standard to protect workers from hazards, fatalities, and injuries in tree care operations.
On March 13, 2015, OSHA published in the Federal Register a notice of proposed rulemaking (NPRM) to revise its eye and face protection standards for general industry, shipyard employment, marine terminals, longshoring, and construction by updating the references to national consensus standards approved by the American National Standards Institute (ANSI). OSHA received no significant objections from commenters and therefore is adopting the amendments as proposed. This final rule updates the references in OSHA's eye and face standards to reflect the most recent edition of the ANSI/International Safety Equipment Association (ISEA) eye and face protection standard. It removes the oldest-referenced edition of the same ANSI standard. It also amends other provisions of the construction eye and face protection standard to bring them into alignment with OSHA's general industry and maritime standards.
The Occupational Safety and Health Administration (OSHA) is amending its existing standards for occupational exposure to respirable crystalline silica. OSHA has determined that employees exposed to respirable crystalline silica at the previous permissible exposure limits face a significant risk of material impairment to their health. The evidence in the record for this rulemaking indicates that workers exposed to respirable crystalline silica are at increased risk of developing silicosis and other non-malignant respiratory diseases, lung cancer, and kidney disease. This final rule establishes a new permissible exposure limit of 50 micrograms of respirable crystalline silica per cubic meter of air (50 μg/m 3 ) as an 8-hour time-weighted average in all industries covered by the rule. It also includes other provisions to protect employees, such as requirements for exposure assessment, methods for controlling exposure, respiratory protection, medical surveillance, hazard communication, and recordkeeping. OSHA is issuing two separate standards—one for general industry and maritime, and the other for construction—in order to tailor requirements to the circumstances found in these sectors.
OSHA is rescheduling the informal public hearing on its proposed rule “Occupational Exposure to Beryllium and Beryllium Compounds.” The public hearing will now begin on Monday March 21, 2016 at 2 p.m., local time. The public hearing notice was published in the Federal Register on December 30, 2015. The proposed rule was published in the Federal Register on August 7, 2015 and the 90-day public comment period ended on November 5, 2015. The December 30, 2015 Federal Register notice of informal public hearing describes the procedures that will govern this hearing http://www.regulations.gov/#!documentDetail;D=OSHA-H005C-2006-0870-1706. All other information from this Federal Register notice remains the same.
OSHA is scheduling an informal public hearing on its proposed rule “Occupational Exposure to Beryllium and Beryllium Compounds.” The proposed rule was published in the Federal Register on August 7, 2015 and the 90-day public comment period ended on November 5, 2015. This document describes the procedures that will govern this hearing.
This document corrects the electrical safety-related work practices standard for general industry and the electric power generation, transmission, and distribution standards for general industry and construction to provide additional clarification regarding the applicability of the standards to certain operations, including some tree trimming work that is performed near (but that is not on or directly associated with) electric power generation, transmission, and distribution installations. This document also corrects minor errors in two minimum approach distance tables in the general industry and construction standards for electric power generation, transmission and distribution work.
The Occupational Safety and Health Administration (OSHA) proposes to amend its existing exposure limits for occupational exposure in general industry to beryllium and beryllium compounds and promulgate a substance-specific standard for general industry regulating occupational exposure to beryllium and beryllium compounds. This document proposes a new permissible exposure limit (PEL), as well as ancillary provisions for employee protection such as methods for controlling exposure, respiratory protection, medical surveillance, hazard communication, and recordkeeping. In addition, OSHA seeks comment on a number of alternatives, including a lower PEL, that could affect construction and maritime, as well as general industry.