29 CFR 1926.1403 - Assembly/Disassembly - selection of manufacturer or employer procedures.

§ 1926.1403 Assembly/Disassembly - selection of manufacturer or employer procedures.

When assembling or disassembling equipment (or attachments), the employer must comply with all applicable manufacturer prohibitions and must comply with either:

(a) Manufacturer procedures applicable to assembly and disassembly, or

(b) Employer procedures for assembly and disassembly. Employer procedures may be used only where the employer can demonstrate that the procedures used meet the requirements in § 1926.1406.


The employer must follow manufacturer procedures when an employer uses synthetic slings during assembly or disassembly rigging. (See § 1926.1404(r).)

This is a list of United States Code sections, Statutes at Large, Public Laws, and Presidential Documents, which provide rulemaking authority for this CFR Part.

This list is taken from the Parallel Table of Authorities and Rules provided by GPO [Government Printing Office].

It is not guaranteed to be accurate or up-to-date, though we do refresh the database weekly. More limitations on accuracy are described at the GPO site.

United States Code

Title 29 published on 2015-12-03

The following are ALL rules, proposed rules, and notices (chronologically) published in the Federal Register relating to 29 CFR Part 1926 after this date.

  • 2017-03-02; vol. 82 # 40 - Thursday, March 2, 2017
    1. 82 FR 12318 - Occupational Exposure to Beryllium: Proposed Delay of Effective Date
      GPO FDSys XML | Text
      DEPARTMENT OF LABOR, Occupational Safety and Health Administration
      Proposed delay of effective date.
      Written comments must be submitted (postmarked, sent, or received) by March 13, 2017.
      29 CFR Parts 1910, 1915, and 1926