Jump to navigation
(a) Employers shall not issue or permit the use of unsafe hand tools.
(b) Wrenches, including adjustable, pipe, end, and socket wrenches shall not be used when jaws are sprung to the point that slippage occurs.
(c) Impact tools, such as drift pins, wedges, and chisels, shall be kept free of mushroomed heads.
(d) The wooden handles of tools shall be kept free of splinters or cracks and shall be kept tight in the tool.
This is a list of United States Code sections, Statutes at Large, Public Laws, and Presidential Documents, which provide rulemaking authority for this CFR Part.
This list is taken from the Parallel Table of Authorities and Rules provided by GPO [Government Printing Office].
It is not guaranteed to be accurate or up-to-date, though we do refresh the database weekly. More limitations on accuracy are described at the GPO site.
§ 553 - Rule making
§ 553 - Terminations
§ 653 - Geographic applicability; judicial enforcement; applicability to existing standards; report to Congress on duplication and coordination of Federal laws;...rights, duties, or liabilities of employers and employees unaffected
§ 655 - Standards
§ 655 note - Standards
§ 657 - Inspections, investigations, and recordkeeping
§ 3701 - Definition and application
§ 3704 - Health and safety standards in building trades and construction industry
§ 4853 - Worker protection
Title 29 published on 2015-07-01
The following are ALL rules, proposed rules, and notices (chronologically) published in the Federal Register relating to 29 CFR Part 1926 after this date.
This document corrects the electrical safety-related work practices standard for general industry and the electric power generation, transmission, and distribution standards for general industry and construction to provide additional clarification regarding the applicability of the standards to certain operations, including some tree trimming work that is performed near (but that is not on or directly associated with) electric power generation, transmission, and distribution installations. This document also corrects minor errors in two minimum approach distance tables in the general industry and construction standards for electric power generation, transmission and distribution work.