This is a list of United States Code sections, Statutes at Large, Public Laws, and Presidential Documents, which provide rulemaking authority for this CFR Part.
This list is taken from the Parallel Table of Authorities and Rules provided by GPO [Government Printing Office] .
It is not guaranteed to be accurate or up-to-date, though we do refresh the database weekly. More limitations on accuracy are described at the GPO site.
United States Code U.S. Code: Title 5 - GOVERNMENT ORGANIZATION AND EMPLOYEES U.S. Code: Title 49 - TRANSPORTATION
Title 29 published on 05-Jun-2018 04:21
The following are ALL rules, proposed rules, and notices (chronologically) published in the Federal Register relating to 29 CFR Part 1917 after this date.
2016-03-25; vol. 81 # 58 - Friday, March 25, 2016 81 FR 16085 - Updating OSHA Standards Based on National Consensus Standards; Eye and Face Protection
GPO FDSys XML | Text Additional Documents DEPARTMENT OF LABOR, Occupational Safety and Health Administration Final rule. This final rule becomes effective on April 25, 2016. The incorporation by reference of certain standards listed in the rule was approved by the Director of the Federal Register as of April 25, 2016. 29 CFR Parts 1910, 1915, 1917, 1918, and 1926 Summary On March 13, 2015, OSHA published in the Federal Register a notice of proposed rulemaking (NPRM) to revise its eye and face protection standards for general industry, shipyard employment, marine terminals, longshoring, and construction by updating the references to national consensus standards approved by the American National Standards Institute (ANSI). OSHA received no significant objections from commenters and therefore is adopting the amendments as proposed. This final rule updates the references in OSHA's eye and face standards to reflect the most recent edition of the ANSI/International Safety Equipment Association (ISEA) eye and face protection standard. It removes the oldest-referenced edition of the same ANSI standard. It also amends other provisions of the construction eye and face protection standard to bring them into alignment with OSHA's general industry and maritime standards.
2015-03-25; vol. 80 # 57 - Wednesday, March 25, 2015 80 FR 15702 - Chemical Management and Permissible Exposure Limits (PELs)
GPO FDSys XML | Text Additional Documents DEPARTMENT OF LABOR, Occupational Safety and Health Administration Extension of comment period. Comments must be submitted (postmarked, sent or received) by October 9, 2015. 29 CFR Parts 1910, 1915, 1917, 1918, and 1926 Summary OSHA is extending the comment period on the Request for Information on Chemical Management and Permissible Exposure Limits (PELs) to October 9, 2015.
2014-10-10; vol. 79 # 197 - Friday, October 10, 2014 79 FR 61384 - Chemical Management and Permissible Exposure Limits (PELs)
GPO FDSys XML | Text Additional Documents DEPARTMENT OF LABOR, Occupational Safety and Health Administration Request for Information (RFI). Comments must be submitted by the following dates: Hard copy: must be submitted (postmarked or sent) by April 8, 2015. Electronic transmission or facsimile: must be submitted by April 8, 2015. 29 CFR Parts 1910, 1915, 1917, 1918, and 1926 Summary OSHA is reviewing its overall approach to managing chemical exposures in the workplace and seeks stakeholder input about more effective and efficient approaches that addresses challenges found with the current regulatory approach. This review involves considering issues related to updating permissible exposure limits (PELs), as well as examining other strategies that could be implemented to address workplace conditions where workers are exposed to chemicals. The notice details the role of past court decisions on the Agency's current approach to chemical management for the purpose of informing stakeholders of the legal framework in which the Agency must operate. It then describes possible modifications of existing processes, along with potential new sources of data and alternative approaches the Agency may consider. The Agency is particularly interested in information about how it may take advantage of newer approaches, given its legal requirements. This RFI is concerned primarily with chemicals that cause adverse health effects from long-term occupational exposure, and is not related to activities being conducted under Executive Order 13650, Improving Chemical Facility Safety and Security.
2014-04-21; vol. 79 # 76 - Monday, April 21, 2014 79 FR 22018 - Vertical Tandem Lifts
GPO FDSys XML | Text Additional Documents DEPARTMENT OF LABOR, Occupational Safety and Health Administration Final rule; remand. The final rule becomes effective on July 21, 2014. 29 CFR Part 1917 Summary OSHA is implementing a court-ordered remand of certain portions of the standard for vertical tandem lifts (VTLs). This final rule implements the remand by: Limiting the application of the corner-casting and interbox-connector inspection requirements to shore-to-ship VTLs; and removing the tandem lifts of platform containers from the scope of the VTL standard.
2012-11-16; vol. 77 # 222 - Friday, November 16, 2012 77 FR 68684 - Updating OSHA Standards Based on National Consensus Standards; Head Protection
GPO FDSys XML | Text Additional Documents DEPARTMENT OF LABOR, Occupational Safety and Health Administration Final rule; confirmation of effective date. The direct final rule published on June 22, 2012 (77 FR 37587), was effective on September 20, 2012. For the purposes of judicial review, OSHA considers November 16, 2012, as the date of issuance. 29 CFR Parts 1910, 1915, 1917, 1918, and 1926 Summary OSHA is confirming the effective date of its direct final rule that revises the Head Protection standards for general industry, shipyard employment, marine terminals, longshoring, and construction by updating the reference to a standard published by a standards-developing organization, the American National Standards Institute. In the June 22, 2012, direct final rule, OSHA stated that it would withdraw the companion proposed rule and confirm the effective date of the direct final rule if the Agency received no significant adverse comments. OSHA did not receive significant adverse comments on the direct final rule. Therefore, OSHA is confirming that the direct final rule became effective on September 20, 2012.
77 FR 68717 - Updating OSHA Standards Based on National Consensus Standards; Head Protection
GPO FDSys XML | Text Additional Documents DEPARTMENT OF LABOR, Occupational Safety and Health Administration Proposed rule; withdrawal. Effective November 16, 2012, the proposed rule published June 22, 2012 (77 FR 37617), is withdrawn. 29 CFR Parts 1910, 1915, 1917, 1918, and 1926 Summary With this notice, OSHA is withdrawing the proposed rule that accompanied its direct-final rule revising its Head Protection standards for general industry, shipyard employment, marine terminals, longshoring, and construction.
2012-06-22; vol. 77 # 121 - Friday, June 22, 2012 77 FR 37587 - Updating OSHA Standards Based on National Consensus Standards; Head Protection
GPO FDSys XML | Text Additional Documents DEPARTMENT OF LABOR, Occupational Safety and Health Administration Direct final rule; request for comments. This direct final rule will become effective on September 20, 2012 unless OSHA receives a significant adverse comment by July 23, 2012. If OSHA receives a significant adverse comment, it will publish a timely withdrawal of the rule in the Federal Register. Submit comments to this direct final rule (including comments to the information-collection (paperwork) determination described under the section titled Procedural Determinations), hearing requests, and other information by July 23, 2012. All submissions must bear a postmark or provide other evidence of the submission date. (The following section titled ADDRESSES describes methods available for making submissions.) The Director of the Federal Register approved the incorporation by reference of specific publications listed in this direct final rule as of September 20, 2012. 29 CFR Parts 1910, 1915, 1917, 1918, and 1926 Summary OSHA is issuing this direct final rule to revise the personal protective equipment (PPE) sections of its general industry, shipyard employment, longshoring, and marine terminals standards regarding requirements for head protection. OSHA is updating the references in its standards to recognize the 2009 edition of the American National Standard for Industrial Head Protection, and is deleting the 1986 edition of that national consensus standard because it is out of date. OSHA also is including the construction industry in this rulemaking to ensure consistency among the Agency's standards. OSHA is publishing a proposed rule in today's Federal Register taking this same action.
77 FR 37617 - Updating OSHA Standards Based on National Consensus Standards; Head Protection
GPO FDSys XML | Text Additional Documents DEPARTMENT OF LABOR, Occupational Safety and Health Administration Notice of proposed rulemaking; request for comments. Submit comments to this proposal (including comments to the information-collection (paperwork) determination described under the section titled Procedural Determinations), hearing requests, and other information by July 23, 2012. All submissions must bear a postmark or provide other evidence of the submission date. (The following section titled ADDRESSES describes methods available for making submissions.) 29 CFR parts 1910, 1915, 1917, 1918, and 1926 Summary OSHA is proposing to revise the personal protective equipment (PPE) sections of its general industry, shipyard employment, longshoring, and marine terminals standards regarding requirements for head protection. OSHA is updating the references in its standards to recognize the 2009 edition of the American National Standard for Industrial Head Protection, and is deleting the 1986 edition of that national consensus standard because it is out of date. OSHA also is including the construction industry in this rulemaking to ensure consistency among the Agency's standards. OSHA is publishing a direct final rule in today's Federal Register taking this same action.
2012-03-29; vol. 77 # 61 - Thursday, March 29, 2012 77 FR 18973 - Reinforced Concrete in Construction, and Preventing Backover Injuries and Fatalities
GPO FDSys XML | Text Additional Documents DEPARTMENT OF LABOR, Occupational Safety and Health Administration Request for information (RFI). Submit comments and other information by June 27, 2012. All submissions must bear a postmark or provide other evidence of the submission date. 29 CFR Parts 1910, 1915, 1917, 1926, and 1928 Summary OSHA is aware of employee safety risks in two areas, reinforcing operations in concrete work (construction only) and fatal backovers by vehicles and equipment (all industries), and is requesting information from the public on these risks. This RFI requests information that will assist the Agency in determining what steps, if any, it can take to prevent injuries and fatalities in these two areas.
