This is a list of United States Code sections, Statutes at Large, Public Laws, and Presidential Documents, which provide rulemaking authority for this CFR Part.
This list is taken from the Parallel Table of Authorities and Rules provided by GPO [Government Printing Office] .
It is not guaranteed to be accurate or up-to-date, though we do refresh the database weekly. More limitations on accuracy are described at the GPO site.
United States Code U.S. Code: Title 5 - GOVERNMENT ORGANIZATION AND EMPLOYEES U.S. Code: Title 6 - DOMESTIC SECURITY U.S. Code: Title 29 - LABOR U.S. Code: Title 40 - PUBLIC BUILDINGS, PROPERTY, AND WORKS U.S. Code: Title 42 - THE PUBLIC HEALTH AND WELFARE U.S. Code: Title 49 - TRANSPORTATION
Title 29 published on 05-Jun-2018 04:21
The following are ALL rules, proposed rules, and notices (chronologically) published in the Federal Register relating to 29 CFR Part 1926 after this date.
2018-05-21; vol. 83 # 98 - Monday, May 21, 2018 83 FR 23534 - Cranes and Derricks in Construction: Operator Qualification
GPO FDSys XML | Text Additional Documents DEPARTMENT OF LABOR, Occupational Safety and Health Administration Notice of proposed rulemaking. Comments: Submit comments to this proposed rule, including comments to the information collection requirements (described under the section titled “Agency Determinations”), hearing requests, and other information by June 20, 2018. All submissions must bear a postmark or provide other evidence of the date submitted. Informal public hearing: A hearing can be requested by following the procedures listed under ADDRESSES . If a hearing is requested, OSHA will announce the hearing on its website, www.osha.gov, and publish a hearing notice in the Federal Register . 29 CFR Part 1926 Summary OSHA proposes to update its standard for cranes and derricks in construction by permanently extending and clarifying each employer's duty to ensure the competency of crane operators through required training, certification or licensing, and evaluation. OSHA is also proposing to remove an existing provision that requires different levels of certification based on rated lifting capacity of equipment. This proposal would clarify that while testing organizations are not required to issue certifications distinguished by rated capacities, they are permitted to do so. Finally, it would establish minimum requirements for determining operator competency. OSHA believes that this proposal would maintain safety and health protections for workers while reducing employers' compliance burdens.
2018-04-11; vol. 83 # 70 - Wednesday, April 11, 2018 83 FR 15499 - Safety and Health Regulations for Construction
GPO FDSys XML | Text Additional Documents DEPARTMENT OF LABOR, Occupational Safety and Health Administration 29 CFR Part 1926 Summary
2018-03-07; vol. 83 # 45 - Wednesday, March 7, 2018 83 FR 9701 - Occupational Exposure to Beryllium
GPO FDSys XML | Text Additional Documents DEPARTMENT OF LABOR, Occupational Safety and Health Administration Final rule; OMB information collection approval. Effective March 7, 2018. 29 CFR Parts 1910, 1926, and 1915 Summary This rule is a technical amendment announcing that OMB has approved the collection of information contained in OSHA's standards for Occupational Exposure to Beryllium and Beryllium Compounds in General Industry, and revising OSHA's regulations to reflect that approval. The OMB approval number is 1218-0267.
2017-11-09; vol. 82 # 216 - Thursday, November 9, 2017 82 FR 51986 - Cranes and Derricks in Construction: Operator Certification Extension
GPO FDSys XML | Text Additional Documents DEPARTMENT OF LABOR, Occupational Safety and Health Administration Final rule. This final rule is effective on November 9, 2017. 29 CFR Part 1926 Summary OSHA is delaying its deadline for employers to ensure that crane operators are certified by one year until November 10, 2018. OSHA is also extending its employer duty to ensure that crane operators are competent to operate a crane safely for the same one-year period.
2017-08-30; vol. 82 # 167 - Wednesday, August 30, 2017 82 FR 41184 - Cranes and Derricks in Construction: Operator Certification Extension
GPO FDSys XML | Text Additional Documents DEPARTMENT OF LABOR, Occupational Safety and Health Administration Notice of proposed rulemaking. Submit comments to this proposed rule, including comments to the information collection (paperwork) determination (described under the section titled “Agency Determinations”), hearing requests, and other information by September 29, 2017. All submissions must bear a postmark or provide other evidence of the submission date. 29 CFR Part 1926 Summary Under OSHA's standard for cranes and derricks used in construction work, crane operators are to be certified by November 10, 2017. Until that date, employers also have duties under the standard to ensure that crane operators are trained and competent to operate the crane safely. The Agency delayed the deadline for operator certification by three years to November 10, 2017, and extended the existing employer duties for the same period. The Agency is proposing to delay the deadline and extend the existing employer duty to ensure that operators of equipment covered by this standard are competent to operate the equipment safely for one year to November 17, 2018.
2017-06-27; vol. 82 # 122 - Tuesday, June 27, 2017 82 FR 29182 - Occupational Exposure to Beryllium and Beryllium Compounds in Construction and Shipyard Sectors
GPO FDSys XML | Text Additional Documents DEPARTMENT OF LABOR, Occupational Safety and Health Administration Proposed rule; request for comments. Written comments. Written comments, including comments on the information collection determination described in Section VII of the preamble (OMB Review under the Paperwork Reduction Act of 1995), must be submitted (postmarked, sent, or received) by August 28, 2017. Informal public hearings. The Agency will schedule an informal public hearing on the proposed rule if requested during the comment period. The location and date of the hearing, procedures for interested parties to notify the Agency of their intention to participate, and procedures for participants to submit their testimony and documentary evidence will be announced in the Federal Register if a hearing is requested. 29 CFR Parts 1915 and 1926 Summary The Occupational Safety and Health Administration (OSHA) proposes to revoke the ancillary provisions for the construction and the shipyard sectors that OSHA adopted on January 9, 2017 but retain the new lower permissible exposure limit (PEL) of 0.2 μg/m 3 and the short term exposure limit (STEL) of 2.0 μg/m 3 for each sector. OSHA will not enforce the January 9, 2017 shipyard and construction standards without further notice while this new rulemaking is underway. This proposal does not affect the general industry beryllium standard published on January 9, 2017.
2017-03-21; vol. 82 # 53 - Tuesday, March 21, 2017 82 FR 14439 - Occupational Exposure to Beryllium; Further Delay of Effective Date
GPO FDSys XML | Text Additional Documents DEPARTMENT OF LABOR, Occupational Safety and Health Administration Final rule; further delay of effective date. As of March 21, 2017, the effective date of the final rule amending 29 CFR parts 1910, 1915, and 1926 that published in the Federal Register of January 9, 2017 at 82 FR 2470, delayed at 82 FR 8901 on February 1, 2017, is further delayed to May 20, 2017. 29 CFR Parts 1910, 1915, and 1926 Summary On January 9, 2017, the Occupational Safety and Health Administration (OSHA) published a rule entitled “Occupational Exposure to Beryllium” with an effective date of March 10, 2017 (“Beryllium Final Rule”). OSHA subsequently delayed the effective date of the Beryllium Final Rule to March 21, 2017 (February 1, 2017) and proposed to further delay the effective date to May 20, 2017 (March 2, 2017). This action finalizes that proposal. The additional time will allow OSHA the opportunity for further review of the new Beryllium Final Rule, including review of concerns that commenters raised, and is consistent with the memorandum of January 20, 2017, from the Assistant to the President and Chief of Staff, entitled “Regulatory Freeze Pending Review.”
2017-03-02; vol. 82 # 40 - Thursday, March 2, 2017 82 FR 12318 - Occupational Exposure to Beryllium: Proposed Delay of Effective Date
GPO FDSys XML | Text Additional Documents DEPARTMENT OF LABOR, Occupational Safety and Health Administration Proposed delay of effective date. Written comments must be submitted (postmarked, sent, or received) by March 13, 2017. 29 CFR Parts 1910, 1915, and 1926 Summary In accordance with the Presidential directive as expressed in the memorandum of January 20, 2017, from the Assistant to the President and Chief of Staff, entitled “Regulatory Freeze Pending Review,” this action proposes, following a brief 10-day comment period, to further temporarily delay until May 20, 2017 the effective date of the rule entitled Occupational Exposure to Beryllium, published in the Federal Register on January 9, 2017 (82 FR 2470). The current effective date is March 21, 2017. This additional delay will allow OSHA officials the opportunity for further review and consideration of the new regulations.
2017-02-01; vol. 82 # 20 - Wednesday, February 1, 2017 82 FR 8901 - Occupational Exposure to Beryllium: Delay of Effective Date
GPO FDSys XML | Text Additional Documents DEPARTMENT OF LABOR, Occupational Safety and Health Administration Final rule; delay of effective date. This regulation is effective on February 1, 2017. The effective date of the regulation entitled Occupational Exposure to Beryllium published in the Federal Register on January 9, 2017 (82 FR 2470) is delayed to a new effective date of March 21, 2017. 29 CFR Parts 1910, 1915, and 1926 Summary In accordance with the Presidential directive as expressed in the memorandum of January 20, 2017, from the Assistant to the President and Chief of Staff, entitled “Regulatory Freeze Pending Review,” this action temporarily delays until March 21, 2017 the effective date of the rule entitled Occupational Exposure to Beryllium, published in the Federal Register on January 9, 2017 (82 FR 2470), to allow OSHA officials the opportunity for further review and consideration of new regulations.
2017-01-09; vol. 82 # 5 - Monday, January 9, 2017 82 FR 2470 - Occupational Exposure to Beryllium
GPO FDSys XML | Text Additional Documents DEPARTMENT OF LABOR, Occupational Safety and Health Administration Final rule. Effective date: The final rule becomes effective on March 10, 2017. Compliance dates: Compliance dates for specific provisions are set in § 1910.1024(o) for general industry, § 1915.1024(o) for shipyards, and § 1926.1124(o) for construction. There are a number of collections of information contained in this final rule ( see Section IX, OMB Review under the Paperwork Reduction Act of 1995). Notwithstanding the general date of applicability that applies to all other requirements contained in the final rule, affected parties do not have to comply with the collections of information until the Department of Labor publishes a separate document in the Federal Register announcing the Office of Management and Budget has approved them under the Paperwork Reduction Act. 29 CFR Parts 1910, 1915, and 1926 Summary The Occupational Safety and Health Administration (OSHA) is amending its existing standards for occupational exposure to beryllium and beryllium compounds. OSHA has determined that employees exposed to beryllium at the previous permissible exposure limits face a significant risk of material impairment to their health. The evidence in the record for this rulemaking indicates that workers exposed to beryllium are at increased risk of developing chronic beryllium disease and lung cancer. This final rule establishes new permissible exposure limits of 0.2 micrograms of beryllium per cubic meter of air (0.2 μg/m 3 ) as an 8-hour time-weighted average and 2.0 μg/m 3 as a short-term exposure limit determined over a sampling period of 15 minutes. It also includes other provisions to protect employees, such as requirements for exposure assessment, methods for controlling exposure, respiratory protection, personal protective clothing and equipment, housekeeping, medical surveillance, hazard communication, and recordkeeping. OSHA is issuing three separate standards—for general industry, for shipyards, and for construction—in order to tailor requirements to the circumstances found in these sectors.
2016-12-02; vol. 81 # 232 - Friday, December 2, 2016 81 FR 86987 - Standards Improvement Project-Phase IV
GPO FDSys XML | Text Additional Documents DEPARTMENT OF LABOR, Occupational Safety and Health Administration Notice of proposed rulemaking; extension of written comment period. Comments must be submitted by January 4, 2017. All submissions must bear a postmark or provide other evidence of the submission date. 29 CFR Parts 1904, 1910, 1915 and 1926 Summary On October 4, 2016, OSHA published a Notice of Proposed Rulemaking (NPRM) titled “Standards Improvement Project-Phase IV.” The period for submitting comments is being extended 30 days to allow parties affected by the rule more time to review the proposed rule and collect information and data necessary for comments.
2016-10-04; vol. 81 # 192 - Tuesday, October 4, 2016 81 FR 68504 - Standards Improvement Project-Phase IV
GPO FDSys XML | Text Additional Documents DEPARTMENT OF LABOR, Occupational Safety and Health Administration Proposed rule; request for comments. Submit comments and hearing requests by December 5, 2016. All submissions must bear a postmark or provide other evidence of the submission date. 29 CFR Parts 1904, 1910, 1915, and 1926 Summary In response to the President's Executive Order 13563, “Improving Regulations and Regulatory Review,” the Occupational Safety and Health Administration (OSHA) is continuing its efforts to remove or revise outdated, duplicative, unnecessary, and inconsistent requirements in its safety and health standards. The current review, the fourth in this ongoing effort, is called Standards Improvement Project-Phase IV (SIP-IV). The goal of the proposed rulemaking is to reduce regulatory burden while maintaining or enhancing employees' safety and health. SIP-IV focuses primarily on OSHA's construction standards.
2016-09-01; vol. 81 # 170 - Thursday, September 1, 2016 81 FR 60272 - Occupational Exposure to Respirable Crystalline Silica; Correction
GPO FDSys XML | Text Additional Documents DEPARTMENT OF LABOR, Occupational Safety and Health Administration Final rule; correcting amendment. Effective September 1, 2016. 29 CFR Part 1910, 1915, and 1926 Summary OSHA published a final rule on occupational exposure to respirable crystalline silica on March 25, 2016 which became effective on June 23, 2016. This document corrects typographical errors in the final rule by revising these sections.
2016-08-12; vol. 81 # 156 - Friday, August 12, 2016 81 FR 53268 - Confined Spaces in Construction; Approval of Collections of Information
GPO FDSys XML | Text Additional Documents DEPARTMENT OF LABOR, Occupational Safety and Health Administration Final rule. Effective August 12, 2016. 29 CFR Part 1926 Summary This rule is a technical amendment revising OSHA's regulations to reflect the approval by the Office of Management and Budget (OMB) of the collections of information contained in OSHA's standard for Confined Spaces in Construction.
2016-07-26; vol. 81 # 143 - Tuesday, July 26, 2016 81 FR 48708 - Occupational Exposure to Respirable Crystalline Silica; Approval of Collections of Information
GPO FDSys XML | Text Additional Documents DEPARTMENT OF LABOR, Occupational Safety and Health Administration Final rule; Office of Management and Budget's (OMB) approval of collections of information. Effective July 26, 2016. 29 CFR Parts 1910, 1915, and 1926 Summary This rule is a technical amendment announcing that OMB has approved the collections of information contained in OSHA's standards for Occupational Exposure to Respirable Crystalline Silica and revising OSHA's regulations to reflect that approval. The OMB approval number is 1218-0266.
2016-05-18; vol. 81 # 96 - Wednesday, May 18, 2016 81 FR 31167 - Occupational Exposure to Respirable Crystalline Silica
GPO FDSys XML | Text Additional Documents DEPARTMENT OF LABOR, Occupational Safety and Health Administration 29 CFR Parts 1910, 1915, and 1926 Summary
2016-03-25; vol. 81 # 58 - Friday, March 25, 2016 81 FR 16085 - Updating OSHA Standards Based on National Consensus Standards; Eye and Face Protection
GPO FDSys XML | Text Additional Documents DEPARTMENT OF LABOR, Occupational Safety and Health Administration Final rule. This final rule becomes effective on April 25, 2016. The incorporation by reference of certain standards listed in the rule was approved by the Director of the Federal Register as of April 25, 2016. 29 CFR Parts 1910, 1915, 1917, 1918, and 1926 Summary On March 13, 2015, OSHA published in the Federal Register a notice of proposed rulemaking (NPRM) to revise its eye and face protection standards for general industry, shipyard employment, marine terminals, longshoring, and construction by updating the references to national consensus standards approved by the American National Standards Institute (ANSI). OSHA received no significant objections from commenters and therefore is adopting the amendments as proposed. This final rule updates the references in OSHA's eye and face standards to reflect the most recent edition of the ANSI/International Safety Equipment Association (ISEA) eye and face protection standard. It removes the oldest-referenced edition of the same ANSI standard. It also amends other provisions of the construction eye and face protection standard to bring them into alignment with OSHA's general industry and maritime standards.
81 FR 16286 - Occupational Exposure to Respirable Crystalline Silica
GPO FDSys XML | Text Additional Documents DEPARTMENT OF LABOR, Occupational Safety and Health Administration Final rule. The final rule is effective on June 23, 2016. Start-up dates for specific provisions are set in § 1910.1053(l) for general industry and maritime and in § 1926.1153(k) for construction. 29 CFR Parts 1910, 1915, and 1926 Summary The Occupational Safety and Health Administration (OSHA) is amending its existing standards for occupational exposure to respirable crystalline silica. OSHA has determined that employees exposed to respirable crystalline silica at the previous permissible exposure limits face a significant risk of material impairment to their health. The evidence in the record for this rulemaking indicates that workers exposed to respirable crystalline silica are at increased risk of developing silicosis and other non-malignant respiratory diseases, lung cancer, and kidney disease. This final rule establishes a new permissible exposure limit of 50 micrograms of respirable crystalline silica per cubic meter of air (50 μg/m 3 ) as an 8-hour time-weighted average in all industries covered by the rule. It also includes other provisions to protect employees, such as requirements for exposure assessment, methods for controlling exposure, respiratory protection, medical surveillance, hazard communication, and recordkeeping. OSHA is issuing two separate standards—one for general industry and maritime, and the other for construction—in order to tailor requirements to the circumstances found in these sectors.
2016-02-16; vol. 81 # 30 - Tuesday, February 16, 2016 81 FR 7717 - Occupational Exposure to Beryllium
GPO FDSys XML | Text Additional Documents DEPARTMENT OF LABOR, Occupational Safety and Health Administration Proposed rule; notice of informal public hearing; Date change. Informal public hearing. The hearing will begin on March 21, 2016 at 2 p.m., local time. If necessary, the hearing will continue from 9:30 a.m. to 5 p.m., local time, on subsequent days, in Washington, DC. The original public hearing start date of February 29, 2016 is withdrawn. 29 CFR Parts 1910, 1915, and 1926 Summary OSHA is rescheduling the informal public hearing on its proposed rule “Occupational Exposure to Beryllium and Beryllium Compounds.” The public hearing will now begin on Monday March 21, 2016 at 2 p.m., local time. The public hearing notice was published in the Federal Register on December 30, 2015. The proposed rule was published in the Federal Register on August 7, 2015 and the 90-day public comment period ended on November 5, 2015. The December 30, 2015 Federal Register notice of informal public hearing describes the procedures that will govern this hearing http://www.regulations.gov/#!documentDetail;D=OSHA-H005C-2006-0870-1706. All other information from this Federal Register notice remains the same.
2015-12-30; vol. 80 # 250 - Wednesday, December 30, 2015 80 FR 81475 - Occupational Exposure to Beryllium
GPO FDSys XML | Text Additional Documents DEPARTMENT OF LABOR, Occupational Safety and Health Administration Proposed rule; notice of informal public hearing. Informal public hearing. The hearing will begin on February 29, 2016 at 2 p.m. If necessary, the hearing will continue from 9:30 a.m. to 5:00 p.m., local time, on subsequent days, in Washington, DC. 29 CFR Parts 1910, 1915, and 1926 Summary OSHA is scheduling an informal public hearing on its proposed rule “Occupational Exposure to Beryllium and Beryllium Compounds.” The proposed rule was published in the Federal Register on August 7, 2015 and the 90-day public comment period ended on November 5, 2015. This document describes the procedures that will govern this hearing.
2015-10-05; vol. 80 # 192 - Monday, October 5, 2015 80 FR 60033 - Electrical Safety-Related Work Practices; Electric Power Generation, Transmission, and Distribution; Electrical Protective Equipment; Corrections
GPO FDSys XML | Text Additional Documents DEPARTMENT OF LABOR, Occupational Safety and Health Administration Correcting amendments. These correcting amendments are effective on October 5, 2015. 29 CFR Parts 1910, 1926 Summary This document corrects the electrical safety-related work practices standard for general industry and the electric power generation, transmission, and distribution standards for general industry and construction to provide additional clarification regarding the applicability of the standards to certain operations, including some tree trimming work that is performed near (but that is not on or directly associated with) electric power generation, transmission, and distribution installations. This document also corrects minor errors in two minimum approach distance tables in the general industry and construction standards for electric power generation, transmission and distribution work.
2015-05-04; vol. 80 # 85 - Monday, May 4, 2015 80 FR 25366 - Confined Spaces in Construction
GPO FDSys XML | Text Additional Documents DEPARTMENT OF LABOR, Occupational Safety and Health Administration Final rule. The final rule becomes effective on August 3, 2015. 29 CFR Part 1926 Summary OSHA is adding a new subpart to provide protections to employees working in confined spaces in construction. This new subpart replaces OSHA's one training requirement for confined space work with a comprehensive standard that includes a permit program designed to protect employees from exposure to many hazards associated with work in confined spaces, including atmospheric and physical hazards. The final rule is similar in content and organization to the general industry confined spaces standard, but also incorporates several provisions from the proposed rule to address construction-specific hazards, accounts for advancements in technology, and improves enforceability of the requirements.
2015-04-15; vol. 80 # 72 - Wednesday, April 15, 2015 80 FR 20185 - Communication Tower Safety
GPO FDSys XML | Text Additional Documents DEPARTMENT OF LABOR, Occupational Safety and Health Administration Request for Information (RFI). Comments and other information must be submitted (postmarked, sent, or received) by June 15, 2015. All submissions must bear a postmark or provide other evidence of the submission date. 29 CFR 1910, 1926 Summary OSHA is aware of employee safety risks in communication tower construction and maintenance activities and is requesting information from the public on these risks. This RFI requests information that will assist the Agency in determining what steps, if any, it can take to prevent injuries and fatalities during tower work.
2015-03-25; vol. 80 # 57 - Wednesday, March 25, 2015 80 FR 15702 - Chemical Management and Permissible Exposure Limits (PELs)
GPO FDSys XML | Text Additional Documents DEPARTMENT OF LABOR, Occupational Safety and Health Administration Extension of comment period. Comments must be submitted (postmarked, sent or received) by October 9, 2015. 29 CFR Parts 1910, 1915, 1917, 1918, and 1926 Summary OSHA is extending the comment period on the Request for Information on Chemical Management and Permissible Exposure Limits (PELs) to October 9, 2015.
2015-02-27; vol. 80 # 39 - Friday, February 27, 2015 80 FR 10633 - Special Meeting: Advisory Committee on Construction Safety and Health (ACCSH)
GPO FDSys XML | Text Additional Documents DEPARTMENT OF LABOR, Occupational Safety and Health Administration Announcement of special meeting of the ACCSH. ACCSH will meet from 9 a.m. to 5 p.m., Tuesday, March 31, 2015, and from 9 a.m. to 1 p.m., Wednesday, April 1, 2015. Submit (postmark, send, transmit) comments, requests to address the ACCSH meeting, speaker presentations (written or electronic), and requests for special accommodations for the ACCSH meeting by March 20, 2015. 29 CFR Part 1926 Summary ACCSH will hold a special meeting March 31-April 1, 2015, in Washington, DC, to consider a proposed rule to revise OSHA's crane operator qualification requirement in the Cranes and Derricks in Construction standard.
2014-10-10; vol. 79 # 197 - Friday, October 10, 2014 79 FR 61384 - Chemical Management and Permissible Exposure Limits (PELs)
GPO FDSys XML | Text Additional Documents DEPARTMENT OF LABOR, Occupational Safety and Health Administration Request for Information (RFI). Comments must be submitted by the following dates: Hard copy: must be submitted (postmarked or sent) by April 8, 2015. Electronic transmission or facsimile: must be submitted by April 8, 2015. 29 CFR Parts 1910, 1915, 1917, 1918, and 1926 Summary OSHA is reviewing its overall approach to managing chemical exposures in the workplace and seeks stakeholder input about more effective and efficient approaches that addresses challenges found with the current regulatory approach. This review involves considering issues related to updating permissible exposure limits (PELs), as well as examining other strategies that could be implemented to address workplace conditions where workers are exposed to chemicals. The notice details the role of past court decisions on the Agency's current approach to chemical management for the purpose of informing stakeholders of the legal framework in which the Agency must operate. It then describes possible modifications of existing processes, along with potential new sources of data and alternative approaches the Agency may consider. The Agency is particularly interested in information about how it may take advantage of newer approaches, given its legal requirements. This RFI is concerned primarily with chemicals that cause adverse health effects from long-term occupational exposure, and is not related to activities being conducted under Executive Order 13650, Improving Chemical Facility Safety and Security.
2014-09-26; vol. 79 # 187 - Friday, September 26, 2014 79 FR 57785 - Cranes and Derricks in Construction: Operator Certification
GPO FDSys XML | Text Additional Documents DEPARTMENT OF LABOR, Occupational Safety and Health Administration Final rule. This final rule will become effective November 9, 2014. 29 CFR Part 1926 Summary OSHA is extending its November 10, 2014, deadline for employers to ensure that crane operators are certified by three years, until November 10, 2017. OSHA is also extending its employer duty to ensure that crane operators are competent to operate a crane safely for the same three-year period.
2014-09-24; vol. 79 # 185 - Wednesday, September 24, 2014 79 FR 56955 - Electric Power Generation, Transmission, and Distribution; Electrical Protective Equipment; Corrections
GPO FDSys XML | Text Additional Documents DEPARTMENT OF LABOR, Occupational Safety and Health Administration Correcting amendments. These corrections become effective on September 24, 2014. 29 CFR Parts 1910 and 1926 Summary On April 11, 2014 (79 FR 20316), the Occupational Safety and Health Administration published a final rule: Revising the general industry standards for electric power generation, transmission, and distribution work and for electrical protective equipment; revising the construction standard for electric power transmission and distribution work; and adopting a new construction standard for electrical protective equipment. The final rule updated those standards and made the general industry and construction standards consistent. This document corrects errors in the preamble and regulatory text of the final rule.
2014-04-15; vol. 79 # 72 - Tuesday, April 15, 2014 79 FR 21164 - Cranes and Derricks in Construction: Operator Certification
GPO FDSys XML | Text Additional Documents DEPARTMENT OF LABOR, Occupational Safety and Health Administration Notice of informal public hearing. Informal public hearing: The informal public hearing will be held on Monday, May 19, 2014, at 9:30 a.m. in the auditorium of the U.S. Department of Labor, 200 Constitution Avenue NW., Washington, DC 20210. Notice of intention to appear: Each person who wishes to testify at the hearing must submit a notice of intention to appear by April 25, 2014. Each person who files a notice of intention to appear may submit a written copy of additional comments to the record before or during the hearing for inclusion in the hearing record. Organizations may submit a single notice of intention to appear regarding multiple members of that organization, but the notice must list the name, occupational title, and position of each individual who plans to testify. In addition, all notices must also include the following information: (1) An email address or other contact information for receiving additional information about the hearing; (2) Name of the establishment or organization, if any, that each individual represents; (3) A brief summary of any documentary evidence each individual plans to present. 29 CFR Part 1926 Summary This notice schedules an informal public hearing on OSHA's proposed extension of the crane-operator certification deadline and the separate existing employer duty to ensure that their crane operators are competent. The Agency proposed three-year extensions for both, from November 10, 2014, to November 10, 2017.
2014-04-11; vol. 79 # 70 - Friday, April 11, 2014 79 FR 20316 - Electric Power Generation, Transmission, and Distribution; Electrical Protective Equipment
GPO FDSys XML | Text Additional Documents DEPARTMENT OF LABOR, Occupational Safety and Health Administration Final rule. The final rule becomes effective on July 10, 2014. (Certain provisions have compliance deadlines after this date as explained later in this preamble.) 29 CFR Parts 1910 and 1926 Summary OSHA last issued rules for the construction of transmission and distribution installations in 1972. Those provisions are now out of date and inconsistent with the more recently promulgated general industry standard covering the operation and maintenance of electric power generation, transmission, and distribution lines and equipment. OSHA is revising the construction standard to make it more consistent with the general industry standard and is making some revisions to both the construction and general industry requirements. The final rules for general industry and construction include new or revised provisions on host employers and contractors, training, job briefings, fall protection, insulation and working position of employees working on or near live parts, minimum approach distances, protection from electric arcs, deenergizing transmission and distribution lines and equipment, protective grounding, operating mechanical equipment near overhead power lines, and working in manholes and vaults. The revised standards will ensure that employers, when appropriate, must meet consistent requirements for work performed under the construction and general industry standards. The final rule also revises the general industry and construction standards for electrical protective equipment. The existing construction standard for the design of electrical protective equipment, which applies only to electric power transmission and distribution work, adopts several national consensus standards by reference. The new standard for electrical protective equipment, which matches the corresponding general industry standard, applies to all construction work and replaces the incorporation of out-of-date consensus standards with a set of performance-oriented requirements that is consistent with the latest revisions of the relevant consensus standards. The final construction rule also includes new requirements for the safe use and care of electrical protective equipment to complement the equipment design provisions. Both the general industry and construction standards for electrical protective equipment will include new requirements for equipment made of materials other than rubber. OSHA is also revising the general industry standard for foot protection. This standard applies to employers performing work on electric power generation, transmission, and distribution installations, as well as employers in other industries. The final rule removes the requirement for employees to wear protective footwear as protection against electric shock.
2014-02-10; vol. 79 # 27 - Monday, February 10, 2014 79 FR 7611 - Cranes and Derricks in Construction: Operator Certification
GPO FDSys XML | Text Additional Documents DEPARTMENT OF LABOR, Occupational Safety and Health Administration Notice of Proposed Rulemaking. Submit comments to this proposed rule, including comments to the information-collection (paperwork) determination (described under the section titled “Agency Determinations”), hearing requests, and other information by March 12, 2014. All submissions must bear a postmark or provide other evidence of the submission date. 29 CFR Part 1926 Summary On August 9, 2010, OSHA issued a final standard establishing requirements for cranes and derricks used in construction work. The standard requires employers to ensure that crane operators are certified by November 10, 2014. Until that date, employers also have added duties under the standard to ensure that crane operators are trained and competent to operate the crane safely. The Agency is proposing to extend the deadline for operator certification by three years to November 10, 2017, and to extend the existing employer duties for the same period.
2014-01-29; vol. 79 # 19 - Wednesday, January 29, 2014 79 FR 4641 - Occupational Exposure to Crystalline Silica; Extension of Comment Period
GPO FDSys XML | Text Additional Documents DEPARTMENT OF LABOR, Occupational Safety and Health Administration Proposed rule; extension of comment period. The comment period for the proposed rule published September 12, 2013 (78 FR 56274), extended on October 31, 2013 (78 FR 65242), is further extended. Comments and written testimony on the NPRM must be submitted (postmarked, sent, or received) by Tuesday, February 11, 2014. 29 CFR Parts 1910, 1915, and 1926 Summary The Occupational Safety and Health Administration (OSHA) is extending the deadline for submitting comments and written testimony on the Notice of Proposed Rulemaking (NPRM) on Occupational Exposure to Crystalline Silica.
2013-11-06; vol. 78 # 215 - Wednesday, November 6, 2013 78 FR 66641 - Incorporation by Reference; Accident Prevention Signs and Tags; Correction
GPO FDSys XML | Text Additional Documents DEPARTMENT OF LABOR, Occupational Safety and Health Administration Correcting amendments. Effective on November 6, 2013. 29 CFR Parts 1910 and 1926 Summary This document contains corrections to the final regulations, which were published in the Federal Register of Thursday, June 13, 2013 (78 FR 35559). The regulations update OSHA's general industry and construction signage standards by adding references to the latest American National Standards Institute (ANSI) standards on specifications for accident prevention signs and tags.
78 FR 66642 - Updating OSHA Standards Based on National Consensus Standards; Signage
GPO FDSys XML | Text Additional Documents DEPARTMENT OF LABOR, Occupational Safety and Health Administration Final rule; confirmation of effective date. The direct final rule published on June 13, 2013 (78 FR 35559), became effective as a final rule on September 11, 2013. For the purposes of judicial review, OSHA considers November 6, 2013, the date of issuance of the final rule. 29 CFR Parts 1910 and 1926 Summary On June 13, 2013, OSHA published in the Federal Register (78 FR 35559) a direct final rule that revised its signage standards for general industry and construction by updating the references to national consensus standards approved by the American National Standards Institute, a clearinghouse that verifies that the criteria for approval of consensus standards have been met. OSHA stated in that Federal Register notice that it would withdraw the companion proposed rule and confirm the effective date of the direct final rule if the Agency received no significant adverse comments on the direct final rule. Since OSHA received no such significant adverse comments, the Agency now confirms that the direct final rule became effective as a final rule on September 11, 2013.
2013-11-04; vol. 78 # 213 - Monday, November 4, 2013 78 FR 65932 - Updating OSHA Standards Based on National Consensus Standards; Signage
GPO FDSys XML | Text Additional Documents DEPARTMENT OF LABOR, Occupational Safety and Health Administration Proposed rule; withdrawal. Effective November 4, 2013, OSHA is withdrawing the proposed rule published June 13, 2013 (78 FR 35585). 29 CFR Parts 1910 and 1926 Summary With this notice, OSHA is withdrawing the proposed rule that accompanied its direct final rule revising its signage standards for general industry and construction.
2013-10-31; vol. 78 # 211 - Thursday, October 31, 2013 78 FR 65242 - Occupational Exposure to Crystalline Silica; Extension of Comment Period; Extension of Period To Submit Notices of Intention To Appear at Public Hearings; Scheduling of Public Hearings
GPO FDSys XML | Text Additional Documents DEPARTMENT OF LABOR, Occupational Safety and Health Administration Proposed rule; extension of comment period; extension of deadline for submitting notices of intention to appear at public hearings; scheduling of public hearings. Written comments. Written comments on the NPRM must be submitted (postmarked, sent, or received) by Monday, January 27, 2014. Informal public hearings. The Agency plans to hold informal public hearings beginning on Tuesday, March 18, 2014, in Washington, DC. OSHA expects the hearings to last from 9:30 a.m. to 5:30 p.m., local time; a schedule will be released prior to the start of the hearings. The exact daily schedule may be amended at the discretion of the presiding administrative law judge (ALJ). If necessary, the hearings will continue at the same time on subsequent days. Peer reviewers of OSHA's Health Effects Literature Review and Preliminary Quantitative Risk Assessment will be present in Washington, DC to hear testimony on the second day of the hearing, March 19, 2014; see Section XV of the NPRM preamble for more information on the peer review process (78 FR 56274, 56440-56442; September 12, 2013). Notice of intention to appear at the hearings. Interested persons who intend to present testimony or question witnesses at the hearings must submit (transmit, send, postmark, deliver) a notice of their intention to do so by December 12, 2013. The notice of intent must indicate if the submitter requests to present testimony on March 19, 2014, in the presence of the peer reviewers. Hearing testimony and documentary evidence. Interested persons who request more than 10 minutes to present testimony, or who intend to submit documentary evidence, at the hearings must submit (transmit, send, postmark, deliver) the full text of their testimony and all documentary evidence by January 27, 2014. See Section XV of the NPRM preamble for details on the format and how to file a notice of intention to appear, submit documentary evidence at the hearing, and request an appropriate amount of time to present testimony (78 FR 56274, 56440-56442; September 12, 2013). 29 CFR Parts 1910, 1915, and 1926 Summary The Occupational Safety and Health Administration (OSHA) is extending the deadline for submitting comments on the Notice of Proposed Rulemaking (NPRM) on Occupational Exposure to Crystalline Silica for an additional 47 days and extending the deadline for submitting notices of intention to appear at its informal public hearings for an additional 30 days. OSHA also is delaying the start of the public hearings by two weeks.
2013-09-12; vol. 78 # 177 - Thursday, September 12, 2013 78 FR 56274 - Occupational Exposure to Respirable Crystalline Silica
GPO FDSys XML | Text Additional Documents DEPARTMENT OF LABOR, Occupational Safety and Health Administration Proposed rule; request for comments. Written comments. Written comments, including comments on the information collection determination described in Section IX of the preamble (OMB Review under the Paperwork Reduction Act of 1995), must be submitted (postmarked, sent, or received) by December 11, 2013. Informal public hearings. The Agency plans to hold informal public hearings beginning on March 4, 2014, in Washington, DC. OSHA expects the hearings to last from 9:30 a.m. to 5:30 p.m., local time; a schedule will be released prior to the start of the hearings. The exact daily schedule may be amended at the discretion of the presiding administrative law judge (ALJ). If necessary, the hearings will continue at the same time on subsequent days. Peer reviewers of OSHA's Health Effects Literature Review and Preliminary Quantitative Risk Assessment will be present in Washington, DC to hear testimony on the second day of the hearing, March 5, 2014; see Section XV for more information on the peer review process. Notice of intention to appear at the hearings. Interested persons who intend to present testimony or question witnesses at the hearings must submit (transmit, send, postmark, deliver) a notice of their intention to do so by November 12, 2013. The notice of intent must indicate if the submitter requests to present testimony in the presence of the peer reviewers. Hearing testimony and documentary evidence. Interested persons who request more than 10 minutes to present testimony, or who intend to submit documentary evidence, at the hearings must submit (transmit, send, postmark, deliver) the full text of their testimony and all documentary evidence by December 11, 2013. See Section XV below for details on the format and how to file a notice of intention to appear, submit documentary evidence at the hearing, and request an appropriate amount of time to present testimony. 29 CFR Parts 1910, 1915, and 1926 Summary The Occupational Safety and Health Administration (OSHA) proposes to amend its existing standards for occupational exposure to respirable crystalline silica. The basis for issuance of this proposal is a preliminary determination by the Assistant Secretary of Labor for Occupational Safety and Health that employees exposed to respirable crystalline silica face a significant risk to their health at the current permissible exposure limits and that promulgating these proposed standards will substantially reduce that risk. This document proposes a new permissible exposure limit, calculated as an 8-hour time-weighted average, of 50 micrograms of respirable crystalline silica per cubic meter of air (50 μg/m 3 ). OSHA also proposes other ancillary provisions for employee protection such as preferred methods for controlling exposure, respiratory protection, medical surveillance, hazard communication, and recordkeeping. OSHA is proposing two separate regulatory texts—one for general industry and maritime, and the other for construction—in order to tailor requirements to the circumstances found in these sectors.
2013-06-13; vol. 78 # 114 - Thursday, June 13, 2013 78 FR 35559 - Updating OSHA Standards Based on National Consensus Standards; Signage
GPO FDSys XML | Text Additional Documents DEPARTMENT OF LABOR, Occupational Safety and Health Administration Direct final rule; request for comments. This direct final rule will become effective on September 11, 2013 unless OSHA receives a significant adverse comment to this direct final rule or the companion proposal by July 15, 2013. If OSHA receives a significant adverse comment, the Agency will publish a timely withdrawal of the direct final rule in the Federal Register . Submit comments on this direct final rule (including comments on the information-collection (paperwork) determination described under the section titled Procedural Determinations, hearing requests, and other information by July 15, 2013. All submissions must bear a postmark or provide other evidence of the submission date (the following section titled ADDRESSES describes the available methods of making submissions). The Director of the Federal Register approved the incorporation by reference of specific publications listed in this direct final rule as of September 11, 2013. 29 CFR Parts 1910 and 1926 Summary The Occupational Safety and Health Administration (“OSHA” or “the Agency”) is issuing this direct final rule to update its general industry and construction signage standards by adding references to the latest versions of the American National Standards Institute (“ANSI”) standards on specifications for accident prevention signs and tags, ANSI Z535.1-2006(R2011), Z535.2-2011 and Z535.5-2011. In this rulemaking, OSHA is retaining the existing references to the earlier ANSI standards, ANSI Z53.1-1967, Z35.1-1968 and Z35.2-1968, in its signage standards, thereby providing employers an option to comply with the updated or earlier standards. OSHA also is incorporating by reference Part VI of the Manual of Uniform Traffic Control Devices (“MUTCD”), 1988 Edition, Revision 3, into the incorporation-by-reference section of the construction standards having inadvertently omitted this edition of the MUTCD from this section during an earlier rulemaking, and amending citations in two provisions of the construction standards to show the correct incorporation-by-reference section. In addition, OSHA is publishing a notice of proposed rulemaking in today's Federal Register adding the same references.
78 FR 35585 - Updating OSHA Standards Based on National Consensus Standards; Signage
GPO FDSys XML | Text Additional Documents DEPARTMENT OF LABOR, Occupational Safety and Health Administration Notice of proposed rulemaking; request for comments. Submit comments on this proposed rule (including comments on the information-collection (paperwork) determination described under the section titled Procedural Determinations, hearing requests, and other information by July 15, 2013. All submissions must bear a postmark or provide other evidence of the submission date (the following section titled ADDRESSES describes the available methods of making submissions). 29 CFR Parts 1910 and 1926 Summary The Occupational Safety and Health Administration (“OSHA” or “the Agency”) proposes to update its general industry and construction signage standards by adding references to the latest versions of the American National Standards Institute (“ANSI”) standards on specifications for accident prevention signs and tags, ANSI Z535.1-2006(R2011), Z535.2-2011, and Z535.5-2011. OSHA also is proposing to retain the existing references to the earlier ANSI standards, ANSI Z53.1-1967, Z35.1-1968, and Z35.2-1968, in its signage standards, thereby providing employers an option to comply with the updated or earlier standards. In addition, OSHA is proposing to incorporate by reference Part VI of the Manual of Uniform Traffic Control Devices (“MUTCD”), 1988 Edition, Revision 3, into the incorporation-by-reference section of the construction standards, having inadvertently omitted this edition of the MUTCD from this section during an earlier rulemaking, and amend citations in two provisions of the construction standards to show the correct incorporation-by-reference section. In addition, OSHA is publishing a direct final rule in today's Federal Register adding the same references.
2013-05-29; vol. 78 # 103 - Wednesday, May 29, 2013 78 FR 32110 - Cranes and Derricks in Construction: Revising the Exemption for Digger Derricks
GPO FDSys XML | Text Additional Documents DEPARTMENT OF LABOR, Occupational Safety and Health Administration Final rule. This final rule is effective on June 28, 2013. 29 CFR Part 1926 Summary OSHA published a direct final rule and a companion notice of proposed rulemaking on November 9, 2012, to broaden the exemption for digger derricks in its construction standard for cranes and derricks. OSHA received a significant adverse comment on the direct final rule during the comment period, and as a result, OSHA withdrew the direct final rule on February 7, 2013. After considering this comment, OSHA is issuing this final rule based on the notice of proposed rulemaking.
2013-04-23; vol. 78 # 78 - Tuesday, April 23, 2013 78 FR 23837 - Cranes and Derricks in Construction: Underground Construction and Demolition
GPO FDSys XML | Text Additional Documents DEPARTMENT OF LABOR, Occupational Safety and Health Administration Final rule. This final rule is effective May 23, 2013. Petitions for review of the final rule are due on June 24, 2013. 29 CFR Part 1926 Summary On August 17, 2012, OSHA issued a notice of proposed rulemaking, as well as a companion direct final rule, that proposed applying the requirements in OSHA's 2010 cranes and derricks construction standard to underground construction work and demolition work. The notice of proposed rulemaking also proposed to correct inadvertent errors in the underground construction and demolition standards. After receiving a comment recommending that OSHA clarify the proposed regulatory text of the demolition standard, OSHA clarified the text and is issuing this final rule to apply the cranes and derricks standard to underground construction work and demolition work.
2013-02-15; vol. 78 # 32 - Friday, February 15, 2013 78 FR 11092 - Safety and Health Regulations for Construction
GPO FDSys XML | Text Additional Documents LABOR DEPARTMENT, Occupational Safety and Health Administration 29 CFR Part 1926 Summary
2013-02-08; vol. 78 # 27 - Friday, February 8, 2013 78 FR 9311 - Hazard Communication; Corrections and Technical Amendment
GPO FDSys XML | Text Additional Documents DEPARTMENT OF LABOR, Occupational Safety and Health Administration Final rule: correction and technical amendment. Effective: February 8, 2013. 29 CFR Parts 1910, 1915, and 1926 Summary OSHA is correcting its regulations that were amended by the Hazard Communication Standard final rule, published in the Federal Register on March 26, 2012. The majority of the corrections are to references inadvertently missed in the original publication of the final rule. Other corrections include correcting values or notations in tables, and updating references to terms.
2013-02-07; vol. 78 # 26 - Thursday, February 7, 2013 78 FR 8985 - Cranes and Derricks in Construction: Revising the Exemption for Digger Derricks
GPO FDSys XML | Text Additional Documents DEPARTMENT OF LABOR, Occupational Safety and Health Administration Withdrawal of direct final rule. OSHA published the direct final rule for revising the exemption for digger derricks on November 9, 2012 (77 FR 67270), and is withdrawing that direct final rule as of February 7, 2013. 29 CFR Part 1926 Summary OSHA published a direct final rule and a companion notice of proposed rulemaking on November 9, 2012, to broaden the exemption for digger derricks in its construction standard for cranes and derricks. OSHA received a significant adverse comment on the direct final rule and is, therefore, withdrawing the direct final rule. OSHA will issue a final rule at a later date based on the notice of proposed rulemaking.
2012-12-06; vol. 77 # 235 - Thursday, December 6, 2012 77 FR 72781 - Standards Improvement Project—Phase IV
GPO FDSys XML | Text Additional Documents DEPARTMENT OF LABOR, Occupational Safety and Health Administration Request for information. Submit comments and additional material by February 4, 2013. All submissions must bear a postmark or provide other evidence of the submission date. 29 CFR Parts 1910 and 1926 Summary OSHA is initiating a regulatory review of its existing safety and health standards in response to the President's Executive Order 13563, “Improving Regulations and Regulatory Review” (76 FR 38210). The Agency conducted similar regulatory reviews of its existing standards previously as “standards improvement projects.” OSHA is issuing this request for information to initiate another of these regulatory reviews, and naming this review the Standards Improvement Project—Phase IV (SIP-IV). The purpose of SIP-IV is to improve and streamline OSHA standards by removing or revising requirements that are confusing or outdated, or that duplicate, or are inconsistent with, other standards. The purpose of the regulatory review is to reduce regulatory burden while maintaining or enhancing employees' safety and health. SIP-IV will focus primarily on OSHA's construction standards. The purpose of this notice is to invite the public, including employers, employees, and employee representatives involved in the construction industry, to submit recommendations for revisions to existing construction standards, including the rationale for these recommendations. OSHA will review this information to determine the need for, and the content of, any subsequent SIP-IV rulemaking.
2012-11-16; vol. 77 # 222 - Friday, November 16, 2012 77 FR 68684 - Updating OSHA Standards Based on National Consensus Standards; Head Protection
GPO FDSys XML | Text Additional Documents DEPARTMENT OF LABOR, Occupational Safety and Health Administration Final rule; confirmation of effective date. The direct final rule published on June 22, 2012 (77 FR 37587), was effective on September 20, 2012. For the purposes of judicial review, OSHA considers November 16, 2012, as the date of issuance. 29 CFR Parts 1910, 1915, 1917, 1918, and 1926 Summary OSHA is confirming the effective date of its direct final rule that revises the Head Protection standards for general industry, shipyard employment, marine terminals, longshoring, and construction by updating the reference to a standard published by a standards-developing organization, the American National Standards Institute. In the June 22, 2012, direct final rule, OSHA stated that it would withdraw the companion proposed rule and confirm the effective date of the direct final rule if the Agency received no significant adverse comments. OSHA did not receive significant adverse comments on the direct final rule. Therefore, OSHA is confirming that the direct final rule became effective on September 20, 2012.
77 FR 68717 - Updating OSHA Standards Based on National Consensus Standards; Head Protection
GPO FDSys XML | Text Additional Documents DEPARTMENT OF LABOR, Occupational Safety and Health Administration Proposed rule; withdrawal. Effective November 16, 2012, the proposed rule published June 22, 2012 (77 FR 37617), is withdrawn. 29 CFR Parts 1910, 1915, 1917, 1918, and 1926 Summary With this notice, OSHA is withdrawing the proposed rule that accompanied its direct-final rule revising its Head Protection standards for general industry, shipyard employment, marine terminals, longshoring, and construction.
2012-11-09; vol. 77 # 218 - Friday, November 9, 2012 77 FR 67270 - Revising the Exemption for Digger Derricks in the Cranes and Derricks in Construction Standard
GPO FDSys XML | Text Additional Documents DEPARTMENT OF LABOR, Occupational Safety and Health Administration Direct final rule. This direct final rule will become effective on February 7, 2013, unless OSHA receives significant adverse comment to this direct final rule by December 10, 2012. All submissions, whether transmitted, mailed, or delivered, must bear a postmark or provide other evidence of the submission date. 29 CFR Part 1926 Summary OSHA is broadening the exemption for digger derricks in its standard for cranes and derricks. OSHA issued a final standard updating the requirements for cranes and derricks on August 9, 2010, and the Edison Electric Institute (EEI) petitioned for review of the standard in the United States Court of Appeals. After petitioning, EEI provided OSHA with new information regarding digger derricks. OSHA reviewed the additional information and the rulemaking record, and decided to broaden the exemption for digger derricks used in the electric-utility industry by means of this direct final rule.
77 FR 67313 - Revising the Exemption for Digger Derricks in the Cranes and Derricks in Construction Standard
GPO FDSys XML | Text Additional Documents DEPARTMENT OF LABOR, Occupational Safety and Health Administration Notice of proposed rulemaking. Comment by December 10, 2012. All submissions, whether transmitted, mailed, or delivered, must bear a postmark or provide other evidence of the submission date. 29 CFR Part 1926 Summary OSHA is broadening the exemption for digger derricks in its standard for cranes and derricks. OSHA issued a final standard updating the requirements for cranes and derricks on August 9, 2010, and the Edison Electric Institute (EEI) petitioned for review of the standard in the United States Court of Appeals. After petitioning, EEI provided OSHA with new information regarding digger derricks. OSHA reviewed the additional information and the rulemaking record, and decided to broaden the exemption for digger derricks used in the electric-utility industry by means of this proposed rule.
2012-10-15; vol. 77 # 199 - Monday, October 15, 2012 77 FR 62433 - Hazard Communication Standard; Approval of Information Collection Requirements
GPO FDSys XML | Text Additional Documents DEPARTMENT OF LABOR, Occupational Safety and Health Administration Final rule; notice of the Office of Management and Budget's (OMB) approval of information collection requirements. The collections of information contained in the final rule published March 26, 2012 (77 FR 17573) are effective October 15, 2012. 29 CFR Parts 1910, 1915, and 1926 Summary The Occupational Safety and Health Administration (OSHA) is announcing that the Office of Management and Budget (OMB) approved the revised information collection requirements contained in the Hazard Communication Standard (HCS) (29 CFR parts 1910, 1915, and 1926) under the Paperwork Reduction Act of 1995 (PRA-95). The OMB control number is 1218-0072.
Pages
