30 CFR Part 57 - Subpart R - Personnel Hoisting
- § 57.19000 Application.
-
Hoists (§§ 57.19001 - 57.19018)
- § 57.19001 Rated capacities.
- § 57.19002 Anchoring.
- § 57.19003 Driving mechanism connections.
- § 57.19004 Brakes.
- § 57.19005 Locking mechanism for clutch.
- § 57.19006 Automatic hoist braking devices.
- § 57.19007 Overtravel and overspeed devices.
- § 57.19008 Friction hoist synchronizing mechanisms.
- § 57.19009 Position indicator.
- § 57.19010 Location of hoist controls.
- § 57.19011 Drum flanges.
- § 57.19012 Grooved drums.
- § 57.19013 Diesel- and other fuel-injection-powered hoists.
- § 57.19014 Friction hoist overtravel protection.
- § 57.19017 Emergency braking for electric hoists.
- § 57.19018 Overtravel by-pass switches.
-
Wire Ropes (§§ 57.19019 - 57.19030)
- § 57.19019 Guide ropes.
- § 57.19021 Minimum rope strength.
- § 57.19022 Initial measurement.
- § 57.19023 Examinations.
- § 57.19024 Retirement criteria.
- § 57.19025 Load end attachments.
- § 57.19026 Drum end attachment.
- § 57.19027 End attachment retermination.
- § 57.19028 End attachment replacement.
- § 57.19030 Safety device attachments.
Authority: Sec. 101, Federal Mine Safety and Health Act of 1977, Pub. L. 91-173 as amended by Pub. L. 95-164, 91 Stat. 1291 (30 U.S.C. 811). -
Headframes and Sheaves (§§ 57.19035 - 57.19038)
-
Conveyances (§§ 57.19045 - 57.19054)
-
Hoisting Procedures (§§ 57.19055 - 57.19083)
- § 57.19055 Availability of hoist operator for manual hoists.
- § 57.19056 Availability of hoist operator for automatic hoists.
- § 57.19057 Hoist operator's physical fitness.
- § 57.19058 Experienced hoist operators.
- § 57.19061 Maximum hoisting speeds.
- § 57.19062 Maximum acceleration and deceleration.
- § 57.19063 Persons allowed in hoist room.
- § 57.19065 Lowering conveyances by the brakes.
- § 57.19066 Maximum riders in a conveyance.
- § 57.19067 Trips during shift changes.
- § 57.19068 Orderly conduct in conveyances.
- § 57.19069 Entering and leaving conveyances.
- § 57.19070 Closing cage doors or gates.
- § 57.19071 Riding in skips or buckets.
- § 57.19072 Skips and cages in same compartment.
- § 57.19073 Hoisting during shift changes.
- § 57.19074 Riding the bail, rim, bonnet, or crosshead.
- § 57.19075 Use of open hooks.
- § 57.19076 Maximum speeds for hoisting persons in buckets.
- § 57.19077 Lowering buckets.
- § 57.19078 Hoisting buckets from the shaft bottom.
- § 57.19079 Blocking mine cars.
- § 57.19080 Hoisting tools, timbers, and other materials.
- § 57.19081 Conveyances not in use.
- § 57.19083 Overtravel backout device.
-
Signaling (§§ 57.19090 - 57.19096)
-
Shafts (§§ 57.19100 - 57.19111)
- § 57.19100 Shaft landing gates.
- § 57.19101 Stopblocks and derail switches.
- § 57.19102 Shaft guides.
- § 57.19103 Dumping facilities and loading pockets.
- § 57.19104 Clearance at shaft stations.
- § 57.19105 Landings with more than one shaft entrance.
- § 57.19106 Shaft sets.
- § 57.19107 Precautions for work in compartment affected by hoisting operation.
- § 57.19108 Posting warning signs during shaft work.
- § 57.19109 Shaft inspection and repair.
- § 57.19110 Overhead protection for shaft deepening work.
- § 57.19111 Shaft-sinking ladders.
-
Inspection and Maintenance (§§ 57.19120 - 57.19135)
- § 57.19120 Procedures for inspection, testing, and maintenance.
- § 57.19121 Recordkeeping.
- § 57.19122 Replacement parts.
- § 57.19129 Examinations and tests at beginning of shift.
- § 57.19130 Conveyance shaft test.
- § 57.19131 Hoist conveyance connections.
- § 57.19132 Safety catches.
- § 57.19133 Shaft.
- § 57.19134 Sheaves.
- § 57.19135 Rollers in inclined shafts.