37 CFR 2.53 - Requirements for drawings filed through the TEAS.

§ 2.53 Requirements for drawings filed through the TEAS.

The drawing must meet the requirements of § 2.52. In addition, in a TEAS submission, the drawing must meet the following requirements:

(a)Standard character drawings. If an applicant seeks registration of a standard character mark, the applicant must enter the mark in the appropriate field on the TEAS form, and check the box to claim that the mark consists of standard characters.

(b)Special form drawings: If an applicant is filing a special form drawing, the applicant must attach a digitized image of the mark to the TEAS submission that meets the requirements of paragraph (c) of this section.

(c)Requirements for digitized image: The image must be in .jpg format and scanned at no less than 300 dots per inch and no more than 350 dots per inch with a length and width of no less than 250 pixels and no more than 944 pixels. All lines must be clean, sharp and solid, not fine or crowded, and produce a high quality image when copied.

[ 68 FR 55764, Sept. 26, 2003, as amended at 70 FR 38774, July 6, 2005; 73 FR 67769, Nov. 17, 2008]

This is a list of United States Code sections, Statutes at Large, Public Laws, and Presidential Documents, which provide rulemaking authority for this CFR Part.

This list is taken from the Parallel Table of Authorities and Rules provided by GPO [Government Printing Office].

It is not guaranteed to be accurate or up-to-date, though we do refresh the database weekly. More limitations on accuracy are described at the GPO site.

United States Code
The section you are viewing is cited by the following CFR sections.