40 CFR § 439.37 - Pretreatment standards for new sources (PSNS).
(b) The pretreatment standards for cyanide are as follows:
|Regulated parameter||Effluent limitation 1|
|Maximum daily discharge||Average monthly discharge must not exceed|
1 Mg/L (ppm).
(c) When monitoring for cyanide at the end-of-pipe is impractical because of dilution by other process wastewaters, compliance with the cyanide pretreatment standards in paragraph (b) of this section must be demonstrated at in-plant monitoring points pursuant to 40 CFR 403.6(e) (2) and (4). Under the same provisions, the permitting authority may impose monitoring requirements on internal wastestreams for any other parameter(s) regulated by this section.
(d) Compliance with the standard in paragraph (b) or (c) of this section may be achieved by certifying to the permit issuing authority that a facility's manufacturing processes neither use nor generate cyanide.
The following state regulations pages link to this page.