40 CFR § 467.64 - New source performance standards.

§ 467.64 New source performance standards.

Any new source subject to this subpart must achieve the following performance standards. The discharge of wastewater pollutants from the core shall not exceed the values set forth below:

Subpart F
Core
Pollutant or pollutant property NSPS
Maximum for any 1 day Maximum for monthly average
mg/off-kg (lb/million off-lbs) of aluminum drawn with emulsions or soaps
Chromium 0.173 0.070
Cyanide 0.094 0.038
Zinc 0.476 0.196
Aluminum 2.85 1.27
Oil and grease 4.67 4.67
Suspended solids 7.00 5.60
pH ( 1) ( 1)

1 Within the range of 7.0 to 10.0 at all times.

Subpart F
Continuous Rod Casting Spent Lubricant
Pollutant or pollutant property NSPS
Maximum for any 1 day Maximum for monthly average
mg/off-kg (lb/million off-lbs) of aluminum rod cast
Chromium 0.0008 0.0003
Cyanide 0.0004 0.0002
Zinc 0.0020 0.0008
Aluminum 0.012 0.0053
Oil and grease 0.020 0.020
Suspended solids 0.030 0.024
pH ( 1) ( 1)

1 Within the range of 7.0 to 10.0 at all times.

Subpart F
Continuous Rod Casting Contact Cooling Water
Pollutant or pollutant property NSPS
Maximum for any 1 day Maximum for monthly average
mg/off-kg (lb/million off-lbs) of aluminum rod cast
Chromium 0.072 0.029
Cyanide 0.039 0.016
Zinc 0.198 0.081
Aluminum 1.184 0.526
Oil and grease 1.940 1.940
Suspended solids 2.91 2.33
pH ( 1) ( 1)

1 Within the range of 7.0 to 10.0 at all times.

Subpart F
Solution Heat Treatment Contact Cooling Water
Pollutant or pollutant property NSPS
Maximum for any 1 day Maximum for monthly average
mg/off-kg (lb/million off-lbs) of aluminum quenched
Chromium 0.754 0.31
Cyanide 0.408 0.16
Zinc 2.08 0.86
Aluminum 12.450 5.52
Oil and grease 20.37 20.37
Suspended solids 20.56 24.45
pH ( 1) ( 1)

1 Within the range of 7.0 to 10.0 at all times.

Subpart F
Cleaning or Etching Bath
Pollutant or pollutant property NSPS
Maximum for any 1 day Maximum for monthly average
mg/off-kg (lb/million off-lbs) of aluminum cleaned or etched
Chromium 0.066 0.027
Cyanide 0.036 0.015
Zinc 0.183 0.075
Aluminum 1.094 0.49
Oil and grease 1.79 1.79
Suspended solids 2.69 2.15
pH ( 1) ( 1)

1 Within the range of 7.0 to 10.0 at all times.

Subpart F
Cleaning or Etching Rinse
Pollutant or pollutant property NSPS
Maximum for any 1 day Maximum for monthly average
mg/off-kg (lb/million off-lbs) of aluminum cleaned or etched
Chromium 0.515 0.21
Cyanide 0.278 0.11
Zinc 1.42 0.59
Aluminum 8.50 3.77
Oil and grease 13.91 13.91
Suspended solids 20.87 16.70
pH ( 1) ( 1)

1 Within the range of 7.0 to 10.0 at all times.

Subpart F
Cleaning or Etching Scrubber Liquor
Pollutant or pollutant property NSPS
Maximum for any 1 day Maximum for monthly average
mg/off-kg (lb/million off-lbs) of aluminum cleaned or etched
Chromium 0.72 0.290
Cyanide 0.387 0.155
Zinc 1.97 0.812
Aluminum 1.18 5.24
Oil and grease 19.33 19.33
Suspended solids 29.00 23.20
pH ( 1) ( 1)

1 Within the range of 7.0 to 10.0 at all times.

[48 FR 49149, Oct. 24, 1983; 49 FR 11633, 11636, Mar. 27, 1984]