Jump to navigation
You must comply with the requirements of the General Provisions (40 CFR part 63, subpart A) according to Table 6 of this subpart.
This is a list of United States Code sections, Statutes at Large, Public Laws, and Presidential Documents, which provide rulemaking authority for this CFR Part.
This list is taken from the Parallel Table of Authorities and Rules provided by GPO [Government Printing Office].
It is not guaranteed to be accurate or up-to-date, though we do refresh the database weekly. More limitations on accuracy are described at the GPO site.
§ 7401 - Congressional findings and declaration of purpose
§ 7402 - Cooperative activities
§ 7403 - Research, investigation, training, and other activities
§ 7404 - Research relating to fuels and vehicles
§ 7405 - Grants for support of air pollution planning and control programs
§ 7406 - Interstate air quality agencies; program cost limitations
§ 7407 - Air quality control regions
§ 7408 - Air quality criteria and control techniques
§ 7409 - National primary and secondary ambient air quality standards
§ 7410 - State implementation plans for national primary and secondary ambient air quality standards
§ 7411 - Standards of performance for new stationary sources
§ 7412 - Hazardous air pollutants
§ 7413 - Federal enforcement
§ 7414 - Recordkeeping, inspections, monitoring, and entry
§ 7415 - International air pollution
§ 7416 - Retention of State authority
§ 7417 - Advisory committees
§ 7418 - Control of pollution from Federal facilities
§ 7419 - Primary nonferrous smelter orders
§ 7420 - Noncompliance penalty
§ 7421 - Consultation
§ 7422 - Listing of certain unregulated pollutants
§ 7423 - Stack heights
§ 7424 - Assurance of adequacy of State plans
§ 7425 - Measures to prevent economic disruption or unemployment
§ 7426 - Interstate pollution abatement
§ 7427 - Public notification
§ 7428 - State boards
§ 7429 - Solid waste combustion
§ 7430 - Emission factors
§ 7431 - Land use authority
Title 40 published on 2015-07-01
The following are ALL rules, proposed rules, and notices (chronologically) published in the Federal Register relating to 40 CFR Part 63 after this date.
The Environmental Protection Agency (EPA) is extending the comment period for the proposed rule titled, “Revisions to Test Methods, Performance Specifications, and Testing Regulations for Air Emission Sources,” that was published in the Federal Register on September 8, 2015. The 60-day comment period in the proposed rule is scheduled to end on November 9, 2015. The extended comment period will close on December 9, 2015. The EPA recently added a technical justification to the docket for the revision in the proposed rule regarding Subpart JJJJ of Part 60 (Standards of Performance for Stationary Spark Ignition Internal Combustion Engines). We also added background information to support our reasoning for soliciting comment about Method 7E stratification. Therefore, the EPA is extending the comment period to allow the public additional time to submit comments and supporting information on these and other aspects of the proposed rule.
The Environmental Protection Agency (EPA) is announcing a public hearing for the proposed rule titled, “Revisions to Test Methods, Performance Specifications, and Testing Regulations for Air Emission Sources,” that was published in the Federal Register on September 8, 2015. The hearing will be held in Research Triangle Park, North Carolina. The EPA is proposing technical and editorial corrections and revisions to regulations related to source testing of emissions. The EPA is proposing to make corrections and updates to testing provisions that contain inaccuracies and outdated procedures, and to provide alternatives to existing testing regulations. The revisions will improve the quality of data and provide testers flexibility to use recently-approved alternative procedures. Many of the changes were suggested by testers and other end-users and will not impose new substantive requirements on source owners or operators.
This action finalizes the residual risk and technology review (RTR), and the rule review, we conducted for the Secondary Aluminum Production source category regulated under national emission standards for hazardous air pollutants (NESHAP). In this action, we are finalizing several amendments to the NESHAP based on the rule review. These final amendments include a requirement to report performance testing through the Electronic Reporting Tool (ERT); provisions allowing owners and operators to change furnace classifications; requirements to account for unmeasured emissions during compliance testing for group 1 furnaces that do not have add-on control devices; alternative compliance options for the operating and monitoring requirements for sweat furnaces; compliance provisions for hydrogen fluoride; provisions addressing emissions during periods of startup, shutdown, and malfunction (SSM); and other corrections and clarifications to the applicability, definitions, operating, monitoring and performance testing requirements. These amendments will improve the monitoring, compliance and implementation of the rule.
The Environmental Protection Agency (EPA) published a final rule in the Federal Register on July 27, 2015, titled National Emission Standards for Hazardous Air Pollutants for the Portland Cement Manufacturing Industry and Standards of Performance for Portland Cement Plants. This final rule makes technical corrections and clarifications to the regulations published in that final rule. The rule also includes a provision describing performance testing requirements when a source demonstrates compliance with the hydrochloric acid (HCl) emissions standard using a continuous emissions monitoring system (CEMS) for sulfur dioxide measurement and reporting.
This action proposes technical and editorial corrections and revisions to regulations related to source testing of emissions. This proposed rule will make corrections and updates to testing provisions that contain inaccuracies and outdated procedures, and provide alternatives to existing testing regulations. These revisions will improve the quality of data and provide testers flexibility to use recently-approved alternative procedures. Many of these changes were suggested by testers and other end-users, and they will not impose new substantive requirements on source owners or operators.
This notice announces our approval of the Alternative Means of Emission Limitation (AMEL) requests for the operation of multi-point ground flares (MPGF) at The Dow Chemical Company's (Dow) Propane Dehydrogenation Plant and Light Hydrocarbons Plant located at its Texas Operations site in Freeport, Texas, and the ExxonMobil Chemical Company (ExxonMobil) Olefins Plant in Baytown, Texas, and its Plastics Plant in Mont Belvieu, Texas. This approval notice also specifies the operating conditions and monitoring, recordkeeping, and reporting requirements for demonstrating compliance with the AMEL that these facilities must follow. In addition, this notice solicits comments on an all aspects of an AMEL request from Occidental Chemical Corporation (OCC) in which long-term MPGF burner stability and destruction efficiency have been demonstrated on different pressure-assisted MPGF burners that OCC has proposed for use in controlling emissions at its Ingleside, Texas, ethylene plant. Lastly, this notice presents and solicits comments on all aspects of a framework of both MPGF burner testing and rule-specific emissions control equivalency demonstrations that we anticipate, when followed, would afford us the ability to approve future AMEL requests for MPGF in a more efficient and streamlined manner.
This action finalizes the residual risk and technology review conducted for the Phosphoric Acid Manufacturing and Phosphate Fertilizer Production source categories regulated under national emission standards for hazardous air pollutants (NESHAP). In addition, this action finalizes an 8-year review of the current new source performance standards (NSPS) for five source categories. We are also taking final action addressing Clean Air Act (CAA) provisions related to emission standards for hazardous air pollutants, review and revision of emission standards, and work practice standards. The final amendments to the Phosphoric Acid Manufacturing NESHAP include: Numeric emission limits for previously unregulated mercury (Hg) and total fluoride emissions from calciners; work practice standards for hydrogen fluoride (HF) emissions from previously unregulated gypsum dewatering stacks and cooling ponds; clarifications to the applicability and monitoring requirements to accommodate process equipment and technology changes; removal of the exemptions for startup, shutdown, and malfunction (SSM); adoption of work practice standards for periods of startup and shutdown; and revised recordkeeping and reporting requirements for periods of SSM. The final amendments to the Phosphate Fertilizer Production NESHAP include: Clarifications to the applicability and monitoring requirements to accommodate process equipment and technology changes; removal of the exemptions for SSM; adoption of work practice standards for periods of startup and shutdown; and revised recordkeeping and reporting requirements for periods of SSM. The revised NESHAP for Phosphoric Acid Manufacturing facilities will mitigate future increases of Hg emissions from phosphate rock calciners by requiring pollution prevention measures. Further, based on the 8-year review of the current NSPS for these source categories, the EPA determined that no revisions to the numeric emission limits in those rules are warranted.
This action finalizes the residual risk and technology reviews (RTR) conducted for the Mineral Wool Production and Wool Fiberglass Manufacturing source categories regulated under national emission standards for hazardous air pollutants (NESHAP). Under this action, we are establishing pollutant-specific emissions limits for hazardous air pollutants (HAP) that were previously regulated (under a surrogate) and for HAP that were previously unregulated. This action finalizes first-time generally available control technologies (GACT) standards for gas-fired glass-melting furnaces at wool fiberglass manufacturing facilities that are area sources. We are also amending regulatory provisions related to emissions during periods of startup, shutdown, and malfunction (SSM); adding requirements for reporting of performance testing through the Electronic Reporting Tool (ERT); and making several minor clarifications and corrections. The revisions in these final rules increase the level of emissions control and environmental protection provided by the Mineral Wool Production and Wool Fiberglass Manufacturing NESHAP.
This action finalizes amendments to the National Emission Standards for Hazardous Air Pollutants (NESHAP) for the Portland Cement Manufacturing Industry and Standards of Performance for Portland Cement Plants. On February 12, 2013, the Environmental Protection Agency (EPA) finalized amendments to the NESHAP and the new source performance standards (NSPS) for the Portland cement industry. Subsequently, the EPA became aware of certain minor technical errors in those amendments, and thus issued a proposal to correct these errors on November 19, 2014 (79 FR 68821). The EPA received 3 comments on the proposal. In response to the comments received and to complete technical corrections, the EPA is now issuing final amendments. In addition, consistent with the U.S. Court of Appeals to the DC Circuit's vacatur of the affirmative defense provisions in the final rule, this action removes those provisions. These amendments do not affect the pollution reduction or costs associated with these standards.