40 CFR § 761.213 - Use of manifest - Commercial storage and disposal facility requirements.
(1) If a commercial storage or disposal facility receives PCB waste accompanied by a manifest, the owner, operator or his/her agent must sign and date the manifest as indicated in paragraph (a)(2) of this section to certify that the PCB waste covered by the manifest was received, that the PCB waste was received except as noted in the discrepancy space of the manifest, or that the PCB waste was rejected as noted in the manifest discrepancy space.
(i) Sign and date, by hand, each copy of the manifest;
(b) If a commercial storage or disposal facility receives, from a rail or water (bulk shipment) transporter, PCB waste which is accompanied by a shipping paper containing all the information required on the manifest (excluding the EPA identification numbers, generator's certification, and signatures), the owner or operator, or his agent, must:
The Agency does not intend that the owner or operator of a facility whose procedures include waste analysis must perform that analysis before signing the shipping paper and giving it to the transporter. Section 761.215(a), however, requires reporting an unreconciled discrepancy discovered during later analysis.
(4) Within 30 days after the delivery, send a copy of the signed and dated manifest or a signed and dated copy of the shipping paper (if the manifest has not been received within 30 days after delivery) to the generator; and
(c) Whenever an off-site shipment of PCB waste is initiated from a commercial storage or disposal facility, the owner or operator of the commercial storage or disposal facility shall comply with the manifest requirements that apply to generators of PCB waste (§ 761.207).