40 CFR Appendix Table 1A to Subpart DDDD of Part 63, Production-Based Compliance Options
|For the following process units . . .||You must meet the following production-based compliance option (total HAP a basis) . . .|
|(1) Fiberboard mat dryer heated zones (at new affected sources only)||0.022 lb/MSF
|(2) Green rotary dryers||0.058 lb/ODT.|
|(3) Hardboard ovens||0.022 lb/MSF
|(4) Press predryers (at new affected sources only)||0.037 lb/MSF
|(5) Pressurized refiners||0.039 lb/ODT.|
|(6) Primary tube dryers||0.26 lb/ODT.|
|(7) Reconstituted wood product board coolers (at new affected sources only)||0.014 lb/MSF
|(8) Reconstituted wood product presses||0.30 lb/MSF
|(9) Softwood veneer dryer heated zones||0.022 lb/MSF
|(10) Rotary strand dryers||0.18 lb/ODT.|
|(11) Secondary tube dryers||0.010 lb/ODT.|
a Total HAP, as defined in § 63.2292, includes acetaldehyde, acrolein, formaldehyde, methanol, phenol, and propionaldehyde. lb/ODT = pounds per oven-dried ton; lb/MSF = pounds per thousand square feet with a specified thickness basis (inches). Section 63.2262(j) shows how to convert from one thickness basis to another.
Note: There is no production-based compliance option for conveyor strand dryers.